Category Archive: Hack of the Week, Metal Fabrication, TECH, Tech Stories, Tools, Videos
Aaron Shows How To Make The HOLE For His Brilliant Legless Tool Stand And BIG Improvements To His Storage System
If you missed this brilliant tool storage and use system that Aaron built for handling many of his stand mounted tools in his small two-car garage, use the link below to check that video out too and...
Karl Fisher From Make It Kustom Shows Us How To Make An EASY, FREE, DIY STRETCHER TOOL! HOW-TO Make “REVERSE”CURVED FLANGES on SHEET METAL
In this episode, Karl makes a DIY stretcher tool from some scrap and a cheap tool from Harbor Freight. In a previous video he made a DIY shrinker from scrap he had laying around. With these two tools...
Tearing Down The Blown Up K24 Swapped StanceWorks Ferrari After A Bad Day Of Racing That Threw The Rods Out Of It.
I’ve only blown up a couple of engines in my day, but when you do there is always the disappointment of tearing stuff up, but then once you get over that there is the desire to tear it apart...
Karl Fisher From Make It Kustom Shows Us How To Make An EASY, FREE, DIY SHRINKER TOOL! HOW-TO Make CURVED FLANGES on SHEET METAL!
In this episode, Karl makes a DIY shrinker from scrap he had laying around. And I know I could absolutely do the same thing with junk I have sitting around. I’m sure you can too. And if you...
How to Remove Rust – 6 Easy Ways to Protect Bare Metal With Willomet Motor And Fab’s 1970 Dodge Charger
We’ve all had to deal with rust repair on a project before, but what about the rust that shows up when you start working on something with new metal? I’m talking about two months into...
Building our first customers roll cage for his C10: what we charged & how much profit we made! The Right Tools And Methods Are Key!
Video Description: In this video Matt and Kevin show you how to build a cage to fit a C10 Chevy truck. We start with a custom fitting while the customer is in the C10 truck. To do this we used our...
Did Project Farm Waste $4,000 For A DIY Transmission Rebuild Kit? Or Is This Smart Money To Spend?
Transmissions are one of the things that enthusiasts seem most hesitant to build on their own. Whether you are talking about automatic or manual transmissions, and whether a newbie or the most...
Torque Test Channel’s TOP 10 TOOLS of 2023: Here’s The List Of Tools You’ve Been Waiting For! See If Your Favorites Are On The List!
We’re tool nuts around here and you regulars know that we love how thorough the Torque Test Channel is at testing tools we need. With lifetime tool rankings, legit testing methods, and an...
How To Index Your Bellhousing At Home: It Is Simple And Easy With Just A Few Tools, And Will Ensure Your Manual Trans Works Flawlessly
You ever fight with a manual transmission that just doesn’t want to slide into the clutch and bellhousing? Or one that just never seems to shift as nicely as you’d like? Or one that makes...
Who Makes The Best Mechanics Tool Set? Testing Shows Some Clear Winners, Check Them Out Now.
Between the Torque Test Channel and Project Farm, we’ve seen tons of tool testing. Ratchets, sockets, screw drivers, and pliers have all been put through their paces to find out who makes the...
Here Are The 10 Best Products Tested By Project Farm in 2023? Let’s Find Out Which Things Are Worth Using!
We follow Project Farm around here and often share videos when the tested products are things we think you will dig. He tests lots of tools and automotive repair products as well as equipment...
Flashlight Shootout: New Milwaukee & Harbor Freight Flashlights vs Streamlight, Nitecore, Coast. Which One Is Worth The Money?
With the unbelievable growth in LED technology over the past several years, flashlights have gotten more and more powerful. Hell, there are ads for them only where folks are using them to start...
SEMA ’23 for the Welding Enthusiast: TimWelds Gives Us All The Tool Highlights Welders Care About From The Ultimate Automotive Trade Show
TimWelds went to the 2023 SEMA Show, like so many of us, and he spent so much time walking around looking at tools and equipment that welders and fabricators want to see. I was so busy during this...
HOW TO: CHEAP LS AFM/DOD CONVERSION. CHEAP, CHEAPER AND CHEAPEST OPTIONS. CONVERT FOR PERF CAM SWAPS
DOD, or Displacement on Demand, and AFM, or Active Fuel Management, is the feature that allows your modern LS/LT to run on just 4 cylinders when going down the freeway so that it gets better mileage....