Tool Tech: Mythbusting! Putting 20 Myths About Using An Impact To The Test! Which Do’s And Don’t Actually Matter?

Opinions are like belly buttons, meaning everyone’s got one, but that doesn’t mean they are based on facts. It is absolutely insane how many people have opinions on how to use a tool...

Read more

This Show is PACKED with RARE Muscle Cars & Cool Corvettes! It’s Corvette Expo And Chevys In The Smokies!

Tommy Lee Byrd, The Hot Rod Hoarder, is back at it with another great video of some insanely rare and awesome muscle cars. These cars were all on hand at the Corvette Expo and Chevys in the Smokies...

Read more

BluePrint Engines Tech: Compression Testing The Right Way. Check Out The Simple Tools And Techniques You Need!

Doing a compression test on an engine is pretty straight forward, and only requires a couple of tools. And only one of those is a “specialty” tool, and you can either rent one from your...

Read more

Use This 3 Step Secret to GLASS FLAT Paint! Kevin Tetz Shares Decades Of Experience That Will Make Your Paint Job A Success

We’ve shared plenty of Kevin Tetz videos over the years around here, and I can tell you that Kevin sure knows what he’s talking about. The number of TV and YouTube personalities that have...

Read more

SUPPORT SURGES FOR LENO’S LAW AS CAR CULTURE DEMANDS COLLECTOR’S RIGHTS: Letters Pour in from California’s Lowrider Community and International Car Rreservationists in support of California SB 1392

We’ve talked about California SB 1392 in the past, and are thrilled that despite not making it to a vote in 2025, the bi-partisan group of California law makers who support it are still pushing...

Read more

How To Fab Headers: Follow Along As The Iron Trap Garage Crew Build Custom Stainless Headers For The Ardun Powered 1933 3 Window!!

Headers are one of those fabrication projects that seem to intimidate a lot of people, and for good reason. If you go at them from the wrong direction, don’t have a game plan in place to start...

Read more

 

Watch A Trucker Hauling A Massive Steel Beam Miscalculate A Corner And The Disaster That Follows His Tiny Mistake

(By Greg Rourke)-You think you’re having a bad day at work? This cat wishes he was having your bad day. Hauling superloads is a nerve wracking job. You are driving a truck that’s longer,...

MORE: XL Videos

Great Gearhead History Video: Men Bet Their Lives On It – Packard Merlin Engines

If you like history, specifically history related to one of the greatest engines ever designed and built, the Rolls Royce Merlin this 20-minute film is not to be missed. While the boys at Rolls Royce...

Dyno Video: Watch A Wretchedly Overpowered Sand Car Lay Down 1300hp At The Tire With A TT 454ci Warhawk Mill!

Few vehicles on Earth have the power to weight ratio that modern sand cars have. These tube chassis wonders that were once mostly powered by stock or warmed up VW engines now sport turbocharged V8s...

Flowtech Releases New Shorty Headers For Late Model Trucks – GM, Ram, And Tacoma Applications

The shorty header is an interesting and great thing for late model performance enthusiasts that need to keep their vehicles emissions compliant for state inspections or any other reasons. Far...

Mega BOOM: A Canadian Pulling Tractor Blows Up So Hard It Barfs Most Of The Motor Right Out Of The Chassis

Bryan Lively is the editor of Pro Pulling Magazine (ProPulling.com) and he’s a BangShifter as well. Bryan sent us a video link to some footage taken recently at a pull up in Canada. Things were...

Project Cheap 10: How To Build A Gear Jamming, Budget Minded, Classic C10 In A Month With Our Pals At American Powertrain

(Words and photos by American Powertrain/Matt Graves) – Let me start off by saying all this is Greg “Snaps” Schneider’s fault. Greg works for Ridetech as owner Bret Voelkel’s...

Watch A Top Truck Challenge Competitor Roll His Massive Truck While Trying To Rip A Four Wheel Steer Donut

The Top Truck Challenge is to hardcore off-road guys as Drag Week is to hardcore street/strip guys. Some of the nation’s biggest, toughest, strangest, and most awesomely built rigs head out to...

SCORE Is Bringing Off-Road Racing to SEMA 2014, Including Night Racing at Las Vegas Motor Speedway

SCORE International, the off-road racing association associated with Baja and Dakar will have a major display at SEMA 2014, including an outdoor section that incorporates exhibits from numerous...

This 6BT Cummins-powered 1978 Ramcharger Is For Sale-We Want It Badly!

The words “Dodge” and “Cummins” just go together. When the W250 and W350 Rams got the 5.9 six in 1989, it was a direct departure from the indirect-injection V8 diesels that Ford and GM were...

Road Test: The 2014 Ford F-150 Tremor – The Sport Truck That Almost Is

I’m not sure if this is a brag or not but I’d venture to say that I logged more miles and drove an F-150 Tremor faster than any other automotive writer has to this point. See, my wife and...

The 1939 Bantam Super Four Pickup Is A Little Rig We Never Knew Existed – This One Is For Sale

Outside of a precious few of you we’re guessing that a very limited number of BangShifters had any idea that there was such a thing as a 1939 Bantam Super Four pickup, right? When I first saw...

The Oldest Known Peterbilt Truck In Existence Has Been Restored To Showroom Perfection – 1939 Model 260 Is Awesome

One of the reasons I love old trucks is because the vast majority of them were worked until their tongues were hanging out or they were so absurdly obsolete that they had no value at all and were...

Watch Mike Ryan’s First Post Wreck Interview From Pikes Peak 2014 – How Did The Truck End Up In The Woods? He’ll Tell You

You know how much we love Mike Ryan’s huge Freightliner around here, right? Chad has made hot laps sitting next to Mike, I have dreamed of actually sitting in the thing for years and we have...

Bottom Dollar Blazer – Episode 7: It’s Time To Start Thinking Paint, BangShift Style.

Well, it’s been a while since I posted my last update to the Blazer project. Class is wrapped up at Assabet Valley Tech, and I got a ton of the grunt work done. Now it’s time to think...