Category Archive: CHEVY, Metal Fabrication, Project Cars, TECH, Tech Stories, TRUCKS, Videos, XL Project Trucks, XL Spotlight, XL Tech Stories, XL Videos
Make It Kustom, HalfAss Kustoms Cab Over Ramp Truck Build! The 1971 GMC Fire Truck Ramp Truck Gets A Custom Under Floor Hydro Boost Brake System That Tilts With The Cab
In this video from the collaboration Fire Truck turned Ramp Truck, where Make It Kustom and HalfAss Kustoms have gotten together to thrash on Karl’s Make It Kustom rig, you’ll see the brake...
“Dirty Martini” • 70 Chevy C10 Build • Part 2
Introducing Project “Dirty Martini”, a C10 project that is going to be as awesome looking as it will be capable. With a bitchin Texas Speed LT5 under the hood, backed by a 10-speed transmission,...
The 1955 Chevy Apache Pickup Rebuild: Firing Up The 6.8 LS3 For The First Time!
The gang has been back at it, and in this video, they are finally getting the truck to actually run! Will it be ready for the trip and actually make it? There have been some great videos and lots of...
“Dirty Martini” • 70 Chevy C10 Build • Part 1
Introducing Project “Dirty Martini”, a C10 project that is going to be as awesome looking as it will be capable. With a bitchin Texas Speed LT5 under the hood, backed by a 10-speed...
The 1955 Chevy Apache Pickup Rebuild: Finally Finishing What They Started?
It’s been too long since we saw the Apache getting work done so it would be closer to being ready for the trip cross country and back to Canada. They are finally back at it, and will it be...
The Vice Grip Garage NASCAR Truck: Part 5 – First Burnout! Plus The Chevelle, Scout, And Square Body Get Some Love
Does it run and drive? Not yet, but it will do burnouts in this video! There are also some other updates coming to several other projects, so this is like a bonus video as far as what we are going to...
The 1955 Chevy Apache Pickup Rebuild: Our 6.8 LS3 Stroker Goes to California… Will it Fit?
It’s time to take this built LS3 and send it to its home! But will this thing fit inside this project truck the way they want it to? This is going to be tight. This project is way bigger than you...
This 1941 Chevrolet Phillips 66 Tanker Truck Is In Incredible Condition And Can Be Yours!
When I saw this thing for sale I was amazed at how nice it is, without being a restored truck. The patina is awesome, it is really straight considering how old it is, and it would be such a cool...
NOT GOOD! FINNEGAN’S CHEVY C10 DOES SIXTH GEAR, 200 MPH, BURNOUTS AND GOES HOME ON A TRAILER!
Ouch… Ears, tires, and hearts were hurt in the filming of this episode and I love it. Finnegan has the C10 out again and is doing things with it that nobody would have thought possible in a C10...
Halfass Kustoms 1955 Chevrolet NAPCO 4×4 Project: Finishing The Final Details On This Build And Trying To Get It Stuck In The Snow!
In this final installment of the NAPCO Clone build, Brent has some work to do in order to get this thing out the door and finished! If you have missed any of the previous installments on this build,...
The 1955 Chevy Apache Pickup Rebuild Continues! Once This Thing Is Clipped, Swapped, And Ready It Will Drive 5000 Miles To Canada
This project is way bigger than you might think, as the Deboss Garage gang scores a support rig from the Dirt Cinema guys and then buys this 1955 Chevy from Stanceworks before taking over his shop to...
Make It Kustom, HalfAss Kustoms Cab Over Ramp Truck Build! The 1971 GMC Fire Truck Ramp Truck Gets The Rear Of The Cab Sorted And Engine In!
Here is the second video in the series about mounting the cab and making it tilt. It features Brent from Halfass Kustoms over at Karl’s place from Make It Kustom. Together they are going to thrash...
Make It Kustom, HalfAss Kustoms Cab Over Ramp Truck Build! 1971 GMC Fire Truck Ramp Truck Gets Yet Another Chassis
Here is the second video in the series that is going to feature Brent from Halfass Kustoms over at Karl’s place from Make It Kustom. Together they are going to thrash and see how far they can...
Halfass Kustoms 1955 Chevrolet NAPCO 4×4 Project: Finishing Front Fender Rust Repair On The 1955 Chevy Napco Clone
In this latest installment of the NAPCO Clone build, Brent is working on finishing up the front fenders. They needed some tricky areas repaired, so check out how he gets creative and breaks down...