Rocking A C3 Corvette? Holley Has Released Braking, Suspension, and Fuel System Components Just For You!


Rocking A C3 Corvette? Holley Has Released Braking, Suspension, and Fuel System Components Just For You!

If you are a fan of the C3 Corvette and especially if you are the owner of a C3 Corvette, it is time to get excited over the latest news from Holley. Those guys have released performance brake upgrades under their Rekudo brand, they have new forged wheel hubs which are way stronger than cast hubs, and they have a drop in muscle car fuel pump module that can feed a Sniper EFI and requires a single line to be connected. Seriously, you have no excuse!

The C3 is a red hot platform to hot rod right now and the cars can be had for crazy reasonable prices, especially later models. This is cool!

Check out all the information on the new products from Holley below –

Holley is pleased to announce the release of five new products for C3 Corvettes – If it has been a few years since your C3 Corvette has seen some love, now is the perfect time to get out in the garage and work on your ride! Rekudo has released new performance brake upgrades for 69-82 Corvettes. Also, their new forged wheel hub assemblies offer 25% higher tensile strength compared to cast hubs, making them a great choice for owners who drive their cars as they were intended to be driven. Sniper EFI has also announced two new drop-in muscle car fuel pump modules for a single fuel line connection install. It has never been easier to convert your Corvette to fuel injection and Sniper’s muscle car modules are a great way to update your aging fuel system.
1965-1982 Corvette Rotors (Front & Rear Available)
REKUDO high quality direct replacement front & rear disk brake rotors for 1965-1982 C2/C3 Chevrolet Corvette’s feature a black E-coat on the fully machined finished hats that passes a 400 hour salt spray test without rusting. Rotor friction surfaces get a double disc ground finish that virtually eliminates run out and disc thickness variation. The finish is also non-directional which allows for better pad and rotor break-in. REKUDO rotors are also mill balanced, an additional machining operation to reduce pedal feedback associated with rotor vibration. It produces a smoother, quieter, application of braking force.
 NOTE: Sold as a pair.
1969-1982 Corvette Forged Front Wheel Hub Assembly
REKUDO has engineered an all-new forged 4140 steel front wheel bearing hub assembly with excellent strength and durability. The forged 4140 steel construction offers 25% higher tensile strength and 35% higher fatigue strength than cast hubs. This hub serves as a direct replacement for any 1969-1982 C3 Chevy Corvette and is EDP coated for corrosion resistance for years of service. The hub comes with races and wheel studs installed; to complete the installation, quality wheel bearings, inner seal, washer, castle nut and cotter pin are included.
 NOTE: Each hub kit is sold individually, and fits either the driver (LH) or passenger (RH) side.
1975-1977 Corvette In-Tank Fuel Pump Module
The Holley 1975-77 Corvette Muscle Car EFI Fuel Pump module was designed as a direct replacement for your factory pick-up and sending unit. There is no need for modifications, and you will not have to replace your fuel tank unless you want to. You can even retain the factory fuel hard line by connecting the outlet of the pump module to the hard line on your vehicle. Remember to plumb with EFI rated fuel hose and hose clamps like Vapor Guard from Earl’s.
1978-1981 Corvette In-Tank Fuel Pump Module
The Holley 1978-81 Corvette Muscle Car EFI Fuel Pump module was designed as a direct replacement for your factory pick-up and sending unit. There is no need to purchase a custom EFI fuel tank and you can even retain the factory fuel hard line. Connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps like Earl’s Vapor Guard line. The Muscle Car EFI Module includes a 255 LPH fuel pump and a Holley HydraMat, an amazing patent-pending fuel reservoir system. The Hydramat reduces fuel starvation issues that might otherwise occur while cornering, accelerating, stopping, traversing inclines, and during low fuel conditions.
 

  • Share This
  • Pinterest
  • 0

3 thoughts on “Rocking A C3 Corvette? Holley Has Released Braking, Suspension, and Fuel System Components Just For You!

Leave a Reply

Your email address will not be published. Required fields are marked *

 


 

 

Get The Bangshift Newsletter