Category Archive: FORD, Metal Fabrication, Project Cars, TECH, Tech Stories, Tools, Videos
How to Make Custom Dies for Simple Body Lines | Fabricating Hemi Coupe Door Reveals Using A Technique That Will Work For Lots Of Stuff!
We humans are some pretty interesting creatures. We can screw some stuff up, that’s for sure, but we’re also pretty smart when it comes to figuring out creative ways to fabricate stuff....
5 EASY Mods For Your CHEAP Welding Table – Harbor Freight, Vevor or Klutch Tables Can All Benefit From These Mods
If you are an average carjunkie, like us here at BANGshift, then we know that you are always looking for the best bang for your buck on tools and equipment for your garage. And when you want a fab or...
The Mangled Mercury Project: Part 6 – Making The Sail Panels, The Last Major Panels Get Fabricated For This Awesome Chop Top 1939 Merc.
We introduced the Mangled Mercury Project recently and shared the first cuts, plans, etc. for this soon to be cooler ride. We continued with more videos in the series, and if you missed those then...
Stanceworks Real Ferrari F40: Part 5 – Fabrication Is About To Get Real On This Rad V12 Powered Ferrari. Tube Bending At Its Best.
It’s time for another build episode of the Ferrari F40 over at Stanceworks, and that means it is tubing time! The chassis started coming together in the last episode, but there is going to be some...
Check Out The ULTIMATE Welding Cart Build: Part 2 – Upgrades Continue, But Your Help Is Needed! Nobody Sells One Like This!
I’m a freak for welding carts, tables, tools, and accessories. There are a lot of good tools, carts, and tables available at a variety of price points, but the reality is that with rare...
Dave Chappelle’s Body Dropped Nissan Project: The Hardbody Gets Bed Mods, Exhaust system, Rear Shocks, Air Ride, And More!
It’s time for the Nissan to get done! Dave has decided he’s going to push to get this thing ready to drive and show, so he’s setting himself some goals and deadlines. We already shared the...
MAKING A Wood HAMMER Formed Firewall: Part 1 – BEADROLLING Can’t Do THIS! But You Can At Home!
Hammer forming is one of the oldest forms of precision sheet metal forming. It’s how many early car body panels were made, and is the process that led to stamping of sheet metal parts. But the...
The Mangled Mercury Project: Part 5 – Shaping Transition Panels To Get The Body To Flow Into The Chopped Roof
We introduced the Mangled Mercury Project recently and shared the first cuts, plans, etc. for this soon to be cooler ride. We continued with more videos in the series, and if you missed those then...
Beater Bomb’s Butthurt Bar – It’s Made Him A Jillion, And It’s Fun And Exciting To Watch! How Does It Work?
The Beater Bomb ButtHurt bar is something special, and it’s cool how it works, but what is funny is that my experience with one came way before he started designing his. In fact, the ones that...
MASSIVE CHANGES! THIS IS WHAT PREPARING BLASPHEMI FOR SICK WEEK 2025 LOOKS LIKE!
Here we go! While Sick Week has started, there are a lot of great videos coming out from everyone’s planning and preparation, and none is more ambitious than Finnegan and a pretty big bunch of...
Stanceworks Is Building A Real Ferrari F40: Part 4 – Chassis And Roll Cage Improvements Beyond What Ferrari Designed For This V12 Beast
It’s time for another build episode of the Ferrari F40 over at Stanceworks, and that means it is tubing time! The chassis started coming together in the last episode, but there is going to be some...
DIY Tube Bumpers & Rock Sliders Build: On This Dream 4Runner, Or Your Ride, These Clean Tube Sliders and Bumper Work!
Tube Bumpers have been commonplace on off-road rigs for a long time, and for good reason. They work, they are clean, and they offer a much lower profile that makes them harder to hang up on rocks...
This Body Dropped Nissan Hardbody Project Isn’t Going To Finish Itself! The Dave Chappelle Thrash Begins Right Here!
It’s time for the Nissan to get done! Dave has decided he’s going to push to get this thing ready to drive and show, so he’s setting himself some goals and deadlines. Check it out....
The Mangled Mercury Project: Part 4 – Stretching and Reshaping The Roof Gutters On The 1939 Mangled Mercury To Make The Chop Top Perfect
We introduced the Mangled Mercury Project recently and shared the first cuts, plans, etc. for this soon to be cooler ride. We continued with more videos in the series, and if you missed those then...