Category Archive: 1320 Project Cars, 1320 Spotlight, 1320 Tech Story, BangShift 1320, FORD, Metal Fabrication, Project Cars, TECH, Tech Stories, Videos
This Old Hot Rod Traditional Style Drag Car Project Part 4: Check Out This Vintage Dragster Build As The Chassis Work Continues!
The Race of Gentleman has spurred a bunch of renewed excitement for traditional hot rod drags both on the dirt and sand, as well as on the dragstrip. They didn’t invent these events, but they have...
Fabrication How-To: #2 – DIY Engine Turning Any Sheet Metal. Dash Inserts, Gauge Panels, And So Much More!
Engine turning is one of the most iconic ways to dress up a piece of sheet metal. Back in the early days of hot rodding, they would engine turn firewall panels, gauge panels, dash inserts, and more....
Stanceworks Is Building A Real Ferrari F40 Like Only They Can: The “F40 Evolution” – Starting at Step 1: Chassis Table & Body Setup!
It’s time to get started on the Ferrari F40 over at Stanceworks. They have all the body parts and tub, so now it is time to get this thing sitting up on the chassis table so they can start...
The Custom Bed On The Two Front Jeep Project Is Almost Done – Part 3: Will The Rest Of The Jeep Be Done For Unreal Adventure?
Dave has gotten most of the Jeep rebuilt, converted, and maintained so that he can get it to the 2024 Unreal Adventure, and the bed is coming along nicely. But will it all be done in time for him to...
Metal Fab: Bello’s Kustoms Is C-Notching And Four-Linking An Aftermarket Chassis For A 1936 Ford Custom
If you’ve been around here for awhile, you know that we love Bello’s Kustoms on YouTube. Mike Bello is funnier than hell, very talented, and has an eye for building customs. He’s...
New Project Truck: Here’s The Metal Massacre Fab Shop’s Next Project Truck, The Blue Goose! Is Matt Getting In Over His Head On This One?
(Words by Charles Wickam) Matt over at Metal Massacre Fab Shop, in Southern Indiana, may have bonked his head jumping into the deep end with this one. He and his wife decided to rescue a long...
Metal Fabrication How-To: Build Your Own Lower Control Arms From Scratch At Home!
You can do it! I know that building your own control arms might be an even more daunting task than the average chassiswork, and that already intimidates a lot of folks, but if you do think right you...
Fabrication How-To: #1 – Flaring Intricate Holes In Tubing For Both Function And Sexiness!
If you’ve ever looked at holes in a tube on a chassis where wiring or cables run out of the hole, you’ve probably seen one of two things. Either the hole was just drilled and cleaned up,...
Vice Grip Garage Garbage Camaro Build: Kevin Tetz Is Showing Off All The Work That Has Been Done So Far, More To Come!
In this update you’ll see just how far this former parts car has come, as Derek gets a look at what Kevin has done so far. It’s going to be amazing to see this car whole again, and the...
This Old Hot Rod Traditional Style Drag Car Project Part 3: Check Out This Vintage Dragster Build! About As Old School As It Gets
The Race of Gentleman has spurred a bunch of renewed excitement for traditional hot rod drags both on the dirt and sand, as well as on the dragstrip. They didn’t invent these events, but they have...
Work Continues To Get A Custom Bed On The Two Front Jeep Project – Famous Jeep Revival For The Unreal Adventure, Part 2
Dave Chappelle is back at it and thrashing to get this whole Jeep rebuilt, converted, and maintained so that he can get it to the 2024 Unreal Adventure. By the way, the event is more than a days...
Make It Kustom Cab Over Ramp Truck: Maiden Voyage Issues, Some Get Fixed, Others Not So Much, Lets Road Trip This Thing 4500 km!
When things aren’t going right, you just go all in right? That’s what Brent and Karl are doing on the ramp truck! It’s got some issues, but they think they can fix them in the...
Lower Your Bug! – Eastwood’s VW Beetle Project Gets A Weld In Adjustable Ball Joint Beam!
This is not only a video that is going to show you how a VW Beetle from beam gets modified for adjusters, but also one that is going to show you some of the cool tools you can get from Eastwood to do...
Metal Shaping Video: Khaos Design Continues This Epic Project By Rebuilding The Front Roof Section Before Giving It A Chop!
The Khaos Design Stout build is something truly special because literally every piece of sheet metal is being customized in some way, shape, or form. The talent being shown in this series is also...