New Junkyard Inventory: Dent Side Ford Pickup Trucks from the 1970’s! Including an XLT 4X4!

Chad Ehrlich is back at it with more new rides coming into the wrecking yard this week. Just when you think there can’t possibly be anymore old Ford trucks sitting around, he shows up with some...

Read more

What Makes the East Coast Gear Supply KP 540 Axle Housing So Good? Ian Johnson Walks Us Through Them.

Heavy duty axles for off-road rigs have come a long way over the years and putting “tons” under a Jeep, or anything else for that matter, is the norm anymore. And you can buy all kinds of...

Read more

Dyno Testing Dual Plane Intake Manifolds: Made in the USA vs Cheap Import Knockoffs – How Do They Compare?

We’re all about made in the USA parts when they make sense, but I’m very well known for saying that crap is crap, regardless of where it comes from. The point being that you should buy...

Read more

Is This Thing An ABOMINATION or GREATNESS? This Is A Small Block Chevy Powered Ford F100! Installing a HUGE Cam and Engine Refresh With Derek.

I know that some of you are screaming already, but the reality is that it’s not like you can’t replace the Chevy with a Ford in this F100 if you buy it and want to “save” it...

Read more

Freiburger and Finnegan Limo Truck Dyno Shootout! How Much Power Did It Make?

If you missed the awesome on the road engine build and swap in Finnegan’s Limo Squarebody truck, then you missed a lot and are going to want to use the link below. They literally built a brand...

Read more

Vintage RV For Sale: This 1972 Chevrolet C30 Open Road Custom Camper Motorhome Is Retro Greatness!

Anyone who’s been hanging out around BANGshift for very long knows I have an affinity for old rv trailers and motorhomes. When I was a kid we had a Roll-a-Long motorhome that was a square body...

Read more

 

Did CHEAP Parts Destroy The Engine In Mortske’s LS Swapped 1985 Chevrolet Crew Cab Dually?!?

There are lots of folks who never buy anything but high dollar factory parts, and then jillions who buy replacement parts from lots of sources. Many folks use price alone to decide which parts to buy...

The StanceWorks 800hp 1931 Ford Model A Race Truck Is Back! It’s terrifyingly fast… and he’s eager to drive it again. But First It Needs A Rebuild

If you aren’t familiar with the Stanceworks 1931 Ford Model A, you should be. This little bastard is epic and yet there is something about it that makes you wonder if it is going to put the...

HOW TO: LT HEAD SWAP AN LS. GEN V L83 HEAD SWAP ON A GEN 4 5.3L L33. HOW MUCH HP ARE THEY WORTH?

GM’s LS engine may be the hottest internal combustion engine in the last two decades, but that doesn’t mean it’s the only thing GM built that is worth building. The LT engine, the...

Will It Run? This 1965 Fargo LCF is “Lightly Seized” After Sitting 5 Years… But I Have Faith In The DEBOSS Garage Crew

What does “lightly seized” mean? It sounds like something I would say but at the same time something nobody SHOULD say. Of course, I would also be the guy that was interested in some...

Will This Abandoned F250 RUN And DRIVE 800 Miles To Mount Rushmore? With A Camper On It?

Derek is back at it, but this time he’s in a truck that is a bit more interesting because it has a camper on it! To me, this won’t be nearly as fun of a story if he doesn’t stay in...

Dylan McCool Is Teaching a High Schooler How to Pull an Engine for the First Time

I honestly can’t remember the first time I was around an engine getting pulled from a car, because I’ve been around it since I was born. But I do remember pulling engines at my...

Featured Products: Safe, Reliable, and Lightweight Aluminum Fuel Cells For Your Race Car from Holley

When it is time for you to build a fuel system for your hot rod or race car, the first thing to consider is the tank or fuel cell. Depending on the configuration of your car or truck, a fuel cell may...

HOW CAN I MAKE MORE POWER FROM MY 190 Horsepower SBC 350? BOLT ONS VS BOOST-WHICH ONE MAKES MORE POWER? TRY BOTH!

We all know you can make real power with any of the common hot rod and racing engine platforms, and that the small-block Chevrolet is obviously capable of being built into a real race engine. But...

Dirthead Dave Adventures: Trail Days on the OnX Offroad Build Challenge during Ultimate Adventure did NOT disappoint!

The onX Offroad Build Challenge is a cool deal where three teams go head to head building their own off-road rigs and then running them during the Ultimate Adventure off-road event. Ultimate...

Surprising 1320 Garage Tour: TimeCapsule Eclipse & STOLEN SEMA ITEMS?!

If you are familiar with Chillin’ with Chet, then you know that there are some pretty cool cars in the collection. In this newest 1320Garage video you are going to get to experience it all with...

Newbern Has A New Ramp Truck Project! This 1968 C50 Is Going To Be Awesome!

Newbern has spent way too much time around all of Finnegan’s ramp trucks, so now he’s going to embark on his own ramp truck project. He and Wesley just picked up this bad ass peach and...

Watch This Sand Rail Pull A Massive Power Wheelie Across Water – Physics Be Damned!

We have shown you Jeeps skittering over water, we have shown you trucks capsizing and sinking into the water, and we have shown you people floating across the water in makeshift junk over the years...

DIY Tech: How To Make Your Own Gaskets At Home – Who Needs A Parts Store?

Every time we go on a Drag and Drive event, I bring two kinds of gasket material so that if we have a problem I can make what is needed. Whether it is for our car or someone else’s car, being...

HOW TO MAKE BIG 6.0L LS POWER! FULL DYNO RESULTS ON CAMS, INTAKES AND (OF COURSE) PROCHARGER BOOST!

While there are a lot of options when it comes to factory engines for LS Swaps, the 4.8, 5.3, and 6.0 LS truck engines are the most popular by far. They are the cheapest, most prolific, and...