Category Archive: 1320 Event Coverage, 1320 Spotlight, Apex Event Coverage, Apex Spotlight, BangShift 1320, BangShift APEX, BangShift XL, Event Coverage, XL Event Coverage, XL Spotlight
Holley’s LSFest Texas Pre-Registration Is Open! Register Now Before It Sells Out!
Feb 09, 2023Chad ReynoldsComments Off on Holley’s LSFest Texas Pre-Registration Is Open! Register Now Before It Sells Out!
Here we go folks! LSFest Texas pre-registration is live and ready to take your entries. This is shaping up to be the biggest and baddest event in Texas and if you want to come out and enjoy...
King Of The Hammers Livestreaming Video: Backdoor Shootout And Race Of Kings Shootout!
Feb 08, 2023Chad ReynoldsComments Off on King Of The Hammers Livestreaming Video: Backdoor Shootout And Race Of Kings Shootout!
Hammers Week is here! In truth, there have been lots of races and events already happening this week but the big stuff is all getting going now. Below we have the Holley EFI Backdoor Shootout rock...
Truck Feature: This Daily Driven Third Generation Square Body C10 Is Still Clocking Thousands Of Miles!
Feb 05, 2023Chad ReynoldsComments Off on Truck Feature: This Daily Driven Third Generation Square Body C10 Is Still Clocking Thousands Of Miles!
So…there are hot rodders and then there are hot rodders. Everyone wants to be the latter, but the truth is that a lot of people will absolutely love this truck and the fact that Rocky drives it...
Derek Finally FINISHED The HEMI Swapped C10 Truck And It’s AMAZING!
Feb 04, 2023Chad ReynoldsComments Off on Derek Finally FINISHED The HEMI Swapped C10 Truck And It’s AMAZING!
Here is Part 8 of the Gen III HEMI C10 build that Derek has dubbed the HemiHalf. It’s back from Moparty and ready to get buttoned up and ready to rock so the burnouts can commence! The thought...
The Evolution Of King Of The Hammers: The Ultra4 Car Has Evolved | King of the Hammers: Origins | Episode 3
Feb 01, 2023Chad ReynoldsComments Off on The Evolution Of King Of The Hammers: The Ultra4 Car Has Evolved | King of the Hammers: Origins | Episode 3
King of the Hammers is one of those events that is hard to comprehend without being there. It’s epic in size, scale, and performance and features some truly unique rides. Ultra 4 rigs are one of...
NOT GOOD! FINNEGAN’S CHEVY C10 DOES SIXTH GEAR, 200 MPH, BURNOUTS AND GOES HOME ON A TRAILER!
Jan 31, 2023Chad ReynoldsComments Off on NOT GOOD! FINNEGAN’S CHEVY C10 DOES SIXTH GEAR, 200 MPH, BURNOUTS AND GOES HOME ON A TRAILER!
Ouch… Ears, tires, and hearts were hurt in the filming of this episode and I love it. Finnegan has the C10 out again and is doing things with it that nobody would have thought possible in a C10...
Halfass Kustoms 1955 Chevrolet NAPCO 4×4 Project: Finishing The Final Details On This Build And Trying To Get It Stuck In The Snow!
Jan 31, 2023Chad ReynoldsComments Off on Halfass Kustoms 1955 Chevrolet NAPCO 4×4 Project: Finishing The Final Details On This Build And Trying To Get It Stuck In The Snow!
In this final installment of the NAPCO Clone build, Brent has some work to do in order to get this thing out the door and finished! If you have missed any of the previous installments on this build,...
Holley’s LSFest West Pre-Registration Is Open! Register Now Before It Sells Out!
Jan 28, 2023Chad ReynoldsComments Off on Holley’s LSFest West Pre-Registration Is Open! Register Now Before It Sells Out!
Here we go folks! LSFest West pre-registration is live and ready to take your entries. This is the biggest and baddest event in the west and if you want to come out and enjoy everything LS and LT...
Paint It, Put It Back Together, And Wheel It! Getting The Jeep Back Together To Go On A Wheelin’ Trip Dirthead Style
Jan 26, 2023Chad ReynoldsComments Off on Paint It, Put It Back Together, And Wheel It! Getting The Jeep Back Together To Go On A Wheelin’ Trip Dirthead Style
Dirthead Dave’s yellow Jeep YJ has been sitting for too long, and it’s time to get it back out on the trail. In order to do that, it needs a couple fixes, some paint, and some prep in...
Halfass Kustoms 1955 Chevrolet NAPCO 4×4 Project: Finishing The Patina To Make All Of This Truck Look Like It’s Been Together Forever
Jan 26, 2023Chad ReynoldsComments Off on Halfass Kustoms 1955 Chevrolet NAPCO 4×4 Project: Finishing The Patina To Make All Of This Truck Look Like It’s Been Together Forever
In this new installment of the NAPCO Clone build, Brent has some work to do in order to really make the patina pop, but not before fixing a couple other rust spots and buttoning up some other...
Newbern Finds The Spot Where Tri-Fives And C20’s Go To Die, Plus Tons Of Parts, And Then Buys A Bus To Haul It All With!
Jan 26, 2023Chad ReynoldsComments Off on Newbern Finds The Spot Where Tri-Fives And C20’s Go To Die, Plus Tons Of Parts, And Then Buys A Bus To Haul It All With!
Newbern is off for more adventures, and this time he’s getting a tour of a spot in the woods that has C10’s stacked up like cord wood. But not just trucks, tons of parts and pieces and...
Make It Kustom, HalfAss Kustoms Cab Over Ramp Truck Build! The 1971 GMC Fire Truck Ramp Truck Four Link And Air Ride For Burnouts!
Jan 25, 2023Chad ReynoldsComments Off on Make It Kustom, HalfAss Kustoms Cab Over Ramp Truck Build! The 1971 GMC Fire Truck Ramp Truck Four Link And Air Ride For Burnouts!
In this video from the collaboration Fire Truck turned Ramp Truck, where Make It Kustom and HalfAss Kustoms have gotten together to thrash on Karl’s Make It Kustom rig, you’ll see the rear get...
The 1955 Chevy Apache Pickup Rebuild Continues! The New Clip Gets All The QA1 Upgrades.
Jan 25, 2023Chad ReynoldsComments Off on The 1955 Chevy Apache Pickup Rebuild Continues! The New Clip Gets All The QA1 Upgrades.
This project is way bigger than you might think, as the Deboss Garage gang scores a support rig from the Dirt Cinema guys and then buys this 1955 Chevy from Stanceworks before taking over his shop to...
Building A Mobile Drill Press Table, And Bead Rolling The Bed Of The Comanche Project With Big Tire Garage
Jan 25, 2023Chad ReynoldsComments Off on Building A Mobile Drill Press Table, And Bead Rolling The Bed Of The Comanche Project With Big Tire Garage
Ian is back at it! This time he’s working on two projects. One is the Comanche build, and the other is a tool build. Yep, he’s modifying shop equipment which we totally approve of. This...






