Category Archive: ENGINE, ENGINES, FORD, Project Cars, TECH, Tech Stories, Videos
Dirthead Dave Bought The Worst Mustang Of All Time! Will It Run And Drive???
Dirthead Dave is fun, mostly because of the variety of stuff that he actually likes. On the show, he was always about off-road stuff, which we love, but there is more to him and that is fun to see on...
Iron Trap Garage Is Rescuing A 1940 Ford Coupe From It’s 60 Year Slumber
Every race or show I attend there is someone I overhear or talk to that is admiring an original car that was a barn find or something like it. And each time I hear them say that there aren’t...
HOT ROD HOARDERS ALTERED ROADSTER – Easy Drag Car Project or Death Trap?
It’s hard to beat the cool old stuff that Tommy Lee Byrd finds in his car hunting adventures, especially when you are talking about old drag cars. He’s got some killer stuff in the family...
How To Build A Channeled Hot Rod: The Working Man’s Model A Sedan Part 22 – Remounting The Steering And Getting The Chassis Ready For Boxing
The body is done! Now it’s time to finish up the chassis, and while the suspension has all been tacked into place, and the steering box is clamped to its home, there is some work required to...
Iron Trap Ardun Headed 1933 3-Window Ford Project – Custom 1940 Ford Hot Rod Gauge Panel
In this video from the 1933 Ford project, you will see Matt installing a super rare set of 1940’s hot rod gauges. Will he ruin them while doing it? If you missed any of the previous videos, use...
How To Build A Channeled Hot Rod: The Working Man’s Model A Sedan Part 21 Welding The Floors In From Underneath!
The body is mostly done, the patch panels are in, the floors are done from the inside, the firewall has been installed and some of the suspension is even set up. But now it’s time to finish...
Quest for 4’s: The Motion Raceworks Pumpkin Spice Fox Gets ALL The Updates, Plus Some Resto Parts Too!
It’s time for more upgrades for the Motion Raceworks Pumpkin Spice Mustang! This is THE car that actually started Motion Raceworks. Doug, Andy, and Brian were single dudes and spent every...
Rebeldryver’s Garage: Rocky Mountain Race Week Prep Of Our 1965 Impala SS, Part 1, At Least The 6 Speed Is Already Done!
Scott is back at it with the 1965 Impala. He’s been doing a lot of cool things to it, but if you missed the T-56 Magnum installation or any other parts of this build you can click the link...
The Ultimate Pre-War Jalopy Shop Truck – Hot Rodding 101
The Iron Trap Model A Shop Truck was a super popular build series, and if you missed it we have a link below. It was simple, but as period correct as possible and just has a cool look and feel that...
How To Build A Channeled Hot Rod: The Working Man’s Model A Sedan Part 20 – Building The Rear Suspension
The body is mostly done, the patch panels are in, the floors are done, the firewall has been setup and all kinds of stuff is getting close, but now it is time to start on suspension so that this...
How To Build A Channeled Hot Rod: The Working Man’s Model A Sedan Part 19 Finishing The Patch Panels
So much work has gone into this step-by-step build of a channeled Model A sedan and we dig it. This thing was rough and needed way more patch panels than most might believe, and the patch panels are...
The Iron Trap Sweetheart Roadster: Installing Rare 1950’s Quad Headlights on Model A Roadster!!
These super cool quad headlights that the Iron Trap guys installed on the Sweetheart Roadster are awesome! There is something special about them and I’ve never seen anything like them before....
Newbern Bought His First Mustang And Took It Straight To The Chassis Shop. This Just Might Get Good.
Well Newbern has gone and done it again. He’s bought himself another project, but this one is what I consider to be one of the most universal racecar platforms of all time, the Fox Body...
