Category Archive: FORD, Metal Fabrication, Project Cars, TECH, Tech Stories, Videos
How To Build A Channeled Hot Rod: The Working Man’s Model A Sedan Part 21 Welding The Floors In From Underneath!
The body is mostly done, the patch panels are in, the floors are done from the inside, the firewall has been installed and some of the suspension is even set up. But now it’s time to finish...
Quest for 4’s: The Motion Raceworks Pumpkin Spice Fox Gets ALL The Updates, Plus Some Resto Parts Too!
It’s time for more upgrades for the Motion Raceworks Pumpkin Spice Mustang! This is THE car that actually started Motion Raceworks. Doug, Andy, and Brian were single dudes and spent every...
Rebeldryver’s Garage: Rocky Mountain Race Week Prep Of Our 1965 Impala SS, Part 1, At Least The 6 Speed Is Already Done!
Scott is back at it with the 1965 Impala. He’s been doing a lot of cool things to it, but if you missed the T-56 Magnum installation or any other parts of this build you can click the link...
The Ultimate Pre-War Jalopy Shop Truck – Hot Rodding 101
The Iron Trap Model A Shop Truck was a super popular build series, and if you missed it we have a link below. It was simple, but as period correct as possible and just has a cool look and feel that...
How To Build A Channeled Hot Rod: The Working Man’s Model A Sedan Part 20 – Building The Rear Suspension
The body is mostly done, the patch panels are in, the floors are done, the firewall has been setup and all kinds of stuff is getting close, but now it is time to start on suspension so that this...
How To Build A Channeled Hot Rod: The Working Man’s Model A Sedan Part 19 Finishing The Patch Panels
So much work has gone into this step-by-step build of a channeled Model A sedan and we dig it. This thing was rough and needed way more patch panels than most might believe, and the patch panels are...
The Iron Trap Sweetheart Roadster: Installing Rare 1950’s Quad Headlights on Model A Roadster!!
These super cool quad headlights that the Iron Trap guys installed on the Sweetheart Roadster are awesome! There is something special about them and I’ve never seen anything like them before....
Newbern Bought His First Mustang And Took It Straight To The Chassis Shop. This Just Might Get Good.
Well Newbern has gone and done it again. He’s bought himself another project, but this one is what I consider to be one of the most universal racecar platforms of all time, the Fox Body...
Make It Kustom Designs A Custom Split 1932 Grill For A Hot Rod Roadster
After installing a cool Duvall windshield on their 1931 Model A Ford Roadster, Karl at Make It Kustom wanted to do a split grill shell as well. The car is running a ’32 Grill Shell, which stock...
How To Build A Channeled Hot Rod: The Working Man’s Model A Sedan Part 18 – Installing Patch Panels To Replace All This Rust!
So much work has gone into this step-by-step build of a channeled Model A sedan and we dig it. Now that the floors are done, and the firewall is finished, and a transmission tunnel to connect the...
Iron Trap Ardun Headed 1933 3-Window Ford Project – Building Custom Zoomie Headers For The Ardun!
In this video from the 1933 Ford project, you will see just how cool it is to build your own set of custom zoomie headers. If you missed any of the previous videos, use the link below to check them...
How To Build A Channeled Hot Rod: The Working Man’s Model A Sedan Part 17 – Custom Transmission Tunnel Fabrication
So much work has gone into this step-by-step build of a channeled Model A sedan and we dig it. Now that the floors are done, and the firewall is finished, it’s time for a transmission tunnel to...
How To Build A Channeled Hot Rod: The Working Man’s Model A Sedan Part 16 – Fabricating A Custom Firewall
So much work has gone into this step-by-step build of a channeled Model A sedan and we dig it. Now that the floors are done, the firewall needs to come together, and here is how you build a custom...
