Category Archive: 1320 Project Cars, 1320 Spotlight, 1320 Suspension Tech, 1320 Tech Story, 1320 Videos, BangShift 1320, Metal Fabrication, SUSPENSION, TECH, Tech Stories, Videos
This Old Hot Rod Traditional Style Drag Car Project Part 8: The Vintage Dragster Gets Front Shock Mounts In Preparation For Some Speed!
It’s getting exciting!!! In this video update on the Vintage Dragster project, it gets front shock mounts and more after coming off the chassis table to sit on the ground for the first time in the...
Get Centurial Tools DIY Welding Fab Table For The Welder In Your Life! – Buy The Plans For Cheap, Have Them Cut, And Weld Them Together Yourself!
If you haven’t heard of Centurial in the last couple of years, you must be living under a rock or you are NOT a DIY fabricator. These guys have been featured on Finnegan’s Garage and...
If You Have A Harbor Freight Sheet Metal Brake, Here Is How To Convert It To A Finger Style Box And Pan Brake
There has never been a better time to be in the market for tools. Whether you are looking for shop tools, hand tools, or machinery, there has never been a more diverse offering on the market. No...
Bello’s Is Working On A 1950 Chevy Pickup Truck: Part 2 – A C-Notch And Transmission Crossmember So Pickup Can Sit Low And Ride Nice
It’s time for an update on this cool 1950 Chevy pickup project they have recently started over at Bello’s Kustoms. Mike and the crew have been working on this one and started out with...
Sheet Metal Tech: How to Build a Bomber Seat with Jamey Jordan At The Handmade Seat Co.
Bomber seats are super cool in the right project, but they can also be super pricey. Sure you can get some cheaper options with similar looks, but if you want something nice you better be prepared to...
Crashed LS Turbo Drag And Drive Car Gets Rebuilt: The Maliboom Gets A Sexy New Rearend AND Comes Home From The Chassis Shop!
Here’s another Maliboom project update and boy is this car coming right along. In the two videos below you are going to see a sexy new rearend housing come together, along with the last of the...
Fabrication How-To #6: How to Bend Square Tubing Without a Bender! (DIY)
Sometimes the best tips someone can give you about a technical subject is what tools to buy and not to buy. Or which tools to spend real money on, and which ones don’t need to be fancy. Or even...
This Old Hot Rod Traditional Style Drag Car Project Part 7: The Vintage Dragster Gets A Mid-Plate And Comes Off The Chassis Table!
It’s about to get exciting!!! In this video update on the Vintage Dragster project, it gets a mid-plate and then comes off the chassis table to sit on the ground for the first time! Plus the...
This Welding And Fab Table Project Is About As Heavy Duty As They Come! Build One For Yourself!
If you spend any time around here then you know I love welding and fab tables and am always sharing videos of guys and gals building their own. This one here is a big boy! With a top that is 5 feet...
This Old Hot Rod Traditional Style Drag Car Project Part 6: The Vintage Dragster Gets Front Hubs, Engine, Trans, And Seat Placement!
This cool vintage dragster project is going to be something fun, that’s for sure. As simple as it is, there are a lot of steps to making it right and lucky for us we get to see each and every...
Mac-Fab Beadlocks Tour And Step By Step How To Beadlock Wheels With Lyle Barnett
Turbo John recently visited Mac-Fab and shot a great behind the scenes video with Lyle Barnett, showing the shop, the process, the ins and outs, and options for getting your wheels beadlocked and it...
Plasma Table Hack! Cut And Notch Round Tubing With Some Simple Brackets And Skateboard Wheels!
Laser and cnc plasma tube notchers are all the rage in manufacturing nowadays because they can significantly shorten the manufacturing process for metal components, and at the same time increase...
Willomet Motor & Fab Shopcast: Check Out This Secret SEMA Project They Were Working On For Seymour Paint’s 75th Anniversary
You’ve seen some of the videos we’ve featured from Willomet Motor and Fab in the past, with various project vehicles they have been working on, and we do have a cool video on their insane...
Rust Repair and DIY Paint Job: Spray Painting A Car With Turbo Cans! Start to Finish Restoration Of A Rusty Crown Vic.
It needs some rust repair, and that kinda sucks, but Carter knows what’s up with that part of this project. Watch, learn some stuff, and then check out the full repaint using Rustoleum Turbo...