Category Archive: 1320 Cars With Doors Feature, 1320 Drag Racing Feature, 1320 Project Cars, 1320 Spotlight, 1320 Tech Story, 1320 Videos, BangShift 1320, DRIVETRAIN, ENGINE, Metal Fabrication, OTHER, Project Cars, TECH, Tech Stories, Videos
Street Freak – Part 7: This Mid-Engine Drag And Drive Lambo Powered All-Wheel Drive Volvo Needs To Be Ready For Street Week!
Here’s the seventh video in the series, and more fab work is happening because some stuff hasn’t worked out so far. Now that doesn’t mean all is lost, but it does mean the pressure is...
Halfass Kustoms 1949 GMC Roadster Pickup Custom: Making Headway On The Custom One Off Front And Rear Bumpers
Custom bumpers baby! The custom bumpers on this truck are something special and although Brent has gone back and forth on them, we know they are going to be something special. I love the idea of...
Puddin’s Fab Shop Model A Project Update: Finishing Up The Floors With A Custom Trans Tunnel, Toe Boards, And More!
Puddin’s new Model A project sure is a good looking car, but that doesn’t mean there aren’t some issues hiding below the skin. We’re looking forward to seeing this thing go from being a...
Fake A/C Refrigerant? Is That A Thing? How Dangerous is Fake Car A/C Refrigerant? Let’s Find Out With Project Farm!
Okay, so I realize the title of this blog post sounds like someone is trying to sell you a can of stuff that says it is R-134A but is really something else, and that’s not the case here. This...
Make It Kustom And HalfAss Kustoms Cab Over Ramp Truck: Welding Starts On The Bed For The 1971 GMC Cabover Ramp Truck!
It’s time for more welding! A big stack of tubing and plate are going to be used to build the bed and make this thing the ultimate hot rod hauler. It’s got a special payload planned for...
Spray Paint Part 2: Is It Possible To Get A Show Quality Paint Job From A Spray Can? Kevin Tetz Gives It A Try… Again!
He’s back at it again, because the results the first time weren’t exactly what he was hoping for. So watch Part 2 and let us know what you think. Also, if you missed Part 1, use the link...
Polishing Turds Season 2: Part 8 – Head Porting Cody’s ProCharged 360 Cubic Inch Small Block, And How A Port Job Really Effects Flow
In the eighth episode of this new Polishing Turds engine project, Pete is going to be performing some cylinder head porting on this little supercharged small-block so it will be able to make big...
Metal Fab Video: Bello’s Kustoms Made A 1951 Chevrolet Post Car Into A Hard Top And NOW They Are Chopping The Top!
We shared the first video from this series a couple weeks ago and now we’ve got the second one to share. In the first video, Bello made this post car into a hard top and now it is time to start...
Wiring 101: Why 50% of All Crimp Connections Fail – Does Up or Down Matter? Let Us Explain
Sometimes I see tech videos online and wonder how something so simple needs a video, and then I realize how many times I look something up on YouTube only to find that the solution is as simple as it...
Is Cheap Engine Oil Just As Good As The Expensive Stuff? Does Your Diesel Actually Need The Good Stuff! Or Is Expensive Not Actually Better?
It seems like there are two kinds of vehicle owners. The first is the type that doesn’t much care what kind of oil goes in their engine as long as it is slippery. The second is the type that...
Finnegan’s Twin-Turbo Cadillac Project Is Back! It’s Time For Some Headers And Turbo Plumbing!
Finnegan is back at it with the Caddy project and we’re glad to see it coming together. He’s got more fabrication to do before the mockup engine can get replaced by the real engine, but...
Make It Kustom, HalfAss Kustoms Cab Over Ramp Truck Build! The 1971 GMC Fire Truck Ramp Truck Bed Is Getting Designed!
In this video from the Fire Truck turned Ramp Truck, where Make It Kustom and HalfAss Kustoms have gotten together to thrash on Karl’s Make It Kustom rig, you’ll see the bed start getting...
Does Iron Trap Garage’s Fresh Blown Ardun OHV Flathead Fit In Their 1933 3-Window Coupe?
A couple of weeks ago we shared a video from the guys at Iron Trap Garage that featured a bad ass Blown Ardun headed flathead Ford that is truly something rare and special. If you missed the previous...
Who Makes The Best Compact Impact Gun? Because Most Stuff On Your Ride Doesn’t Need A 1000 LbFt Impact To Remove Or Install It!
I know that a lot of “normal” people will buy a compact impact driver to drive screws and do DIY stuff at home, but they also have a place in your toolbox for working on cars. With the...