Car Guy Confessions With Jeff Smith – Bangshift’s Chad Reynolds and LS Swap Book Author Jefferson Bryant Steal The Show!

This one was really fun. Our friends Marcel and Jason, the guys behind Auto Revolution and their Car Guy Confessions, Influence and Impact, and several other podcasts, invited me and our friend...

Read more

How Much Horsepower Does An Engine Driven Cooling Fan Really Take From Your Engine?

We tested alternators, engine driven fans, and other accessories on the dyno years ago and I can tell you that most of the accessories on the front of your engine take very little power to turn under...

Read more

HIGH FLYING FORMULA OFFROAD RACING FROM ICELAND’s HELLA 2026! COURSE 2 RACING ACTION

If you are new around there then you might not know that we seriously dig Formula Off-Road racing here at BANGshift.com. This is high flying, loud, and intense racing that involves what look to be...

Read more

Why Is Torx So Bad And So Good At The Same Time? Testing Torx Bits And Explaining How They REALLY Work.

Anyone that works on cars and trucks is familiar with Torx fasteners and bits, as are anyone who’s done any DIY, deck, fence, or construction projects in recent years. There are some big...

Read more

FJ40 Land Cruiser Custom Fabrication: Custom Fender Flares Built For Punishment! Truly Custom Fabrication.

Shannon is back at the fab work on the FJ40, with the rear bumper done, it’s time for fender flares. But these aren’t just any flares, as they will tie into the bumper out back for...

Read more

Marketplace Find: This Survivor 1985 Chevrolet Suburban 2500 Is Big Block Powered Gold! Big Block, TH400, 3.73, And 68K miles!

Wow what a score this one will be for someone. With less than 70,000 miles on the odometer, and interior and paint that look near mint, this big block 2500 Suburban will make a great family cruiser...

Read more

 

Rock Slider Fabrication: Custom Rock Sliders For This Cool Toyota Landcruiser. Build Your Own For Anything!

Dave is back at it, bending tube and welding stuff together to make all kinds of cool projects in the shop. He’s back to the off-road side of things after a couple of videos on his Mini Truck...

Not Stock Photography Visits The Syracuse Nationals: Bitchin Cars And Video Right Here!

John is back at it and this weekend he was at the Syracuse Nationals. We’re talking big boy car show right here and John has grabbed all kinds of great footage from his adventures at the show....

WHAT IS THE BEST LS3 INTAKE? BTR EQUALIZER VS TRINITY VS HIGH RAM! PLUS, BIG PLENUM VOLUME TEST?

Video Description: WHAT IS THE MOST POWERFUL HIGH-RPM LS3 INTAKE MANIFOLD? HOW MUCH POWER IS AN LS3 INTAKE UPGRADE REALLY WORTH? DOES PLENUM VOLUME ADD POWER? WHICH INTAKE MAKES MORE POWER, THE BTR...

427 LS3 STROKER INTAKE TEST-LS3 VS HI RAM VS EDEL PRO FLO XT! WHICH ONE IS BEST FOR BIG-BOY POWER?

Intake manifolds might be the subject of even more controversy than camshafts when it comes to LS engines, but Richard has done all the testing and has the results for this specific combo right here....

Action Video: Driving Off A Cliff! – The Old Smokey F1 Fords FINAL Run At The Pikes Peak Hillclimb 2023 Was Something To Watch!

The Old Smokey F1 truck is pretty well known for being a badass, and was supposed to be making its final runs at the mountain during the 2023 Pikes Peak International Hill Climb, but this was not how...

Columbus Goodguys Show Photos: Even More Customs, Hot Rods, Muscle Cars, Trucks, And Vans From Ohio!

Here’s our fifth gallery of photos from the Goodguys Columbus show and we can’t thank Mike Brooks enough for all of them. We’ve got other photos coming from Bob Chiluk too, and it...

How To: Vent Window Delete – 1973-87 Chevy & GMC Squarebody One Piece Side Glass Conversion

I’ve recently acquired another squarebody Chevrolet project, and while it will be a fairly straight forward project that is just getting a lowering job and an LS swap, I know there will be some...

Columbus Goodguys Show Photos: We’ve Got Customs, Hot Rods, Muscle Cars, Trucks, Vans, And More From Ohio!

Here’s our fourth gallery of photos from the Goodguys Columbus show and we guarantee you are going to want to see them all. We can’t thank Mike Brooks enough for all of them. We’ve...

SEIZED and FLOODED Engine! – Will This Old Truck RUN AND DRIVE Again For Vice Grip Garage?

I’m a big fan of a square-body GM truck, and I kinda dig a stepside, but this one is going to be a challenge to love because it has not had the easiest life. Apparently, it sat for years...

Columbus Goodguys Show Photos: Customs, Hot Rods, Muscle Cars, Trucks, Vans, And More From Goodguys Most Famous Show

Here’s our third gallery of photos from the Goodguys Columbus show and we can’t thank Mike Brooks enough for all of them. We’ve got other photos coming from Bob Chiluk too, and it...

427 LS3 STROKER INTAKE TEST-LS3 VS HI RAM VS EDELBROCK PRO FLO XT! WHICH ONE IS BEST FOR BIG-BOY POWER?

The only thing Richard Holdener has tested more than LS Intake manifolds is LS Camshafts, but he’s spent an insane amount of time not only testing all the intakes on the market, but also...

Selecting The Right Flowmaster Muffler For Your Vehicle Isn’t That Hard, Here’s How

Ever since the first 5.0 Mustang got a set of Flowmasters, their sound has been iconic. I’ve had several sets over the years, and if you love them then you love them forever, and for good...

Engine Building Tech: End Gap Mistakes That Will RUIN Your Engine. Lake Speed Jr.Gives Us The Inside Scoop On Piston Ring Gap!

Lake Speed Jr. is a sharp cat. I’ve known him for years now and ALWAYS enjoy the conversations we have about engine, oil, and motorsports technologies. This dude is super smart, a riot to play...

Columbus Goodguys Show Photos: We’ve Got Tons Of Shots From The Entire Show!

Here’s out second gallery of photos from the Goodguys Columbus show and we can’t thank Mike Brooks enough for all of them. We’ve got other photos coming from Bob Chiluk too, and it...