Category Archive: CAR FEATURES, CHEVY, Hack of the Week, Project Cars, TECH, Tech Stories, Videos
$3,500 Build: Bags, Turbo, Chop, And More!
Here are the latest installments from the $3,500 Build, and it is really starting to come together. There is a lot going on with this build and it is going to be a while before it is completely...
LS Corvair Project: The Transverse LS4 Swap Continues With More Fabrication. This Is Going To Be One Cool Ride.
While I’ve heard of a few drivetrain swaps that practically bolt into other makes and models, that is not going to be the case when you are trying to put an LS4 into the back of a Corvair. These...
LS Corvair Project: More Chassis Work As The Suspension Mounts, Hubs, And Roll Bar Come Together
While I’ve heard of a few drivetrain swaps that practically bolt in to other makes and models, that is not going to be the case when you are trying to put an LS4 into the back of a Corvair. These...
Installing An LS In A Corvair, The Wrong Way! This LS Corvair Project Is Gonna Be Cool.
V8 Corvairs are cool, and I’ve seen several built over the years. Some are front-engine, some “mid” engine, but everyone I’ve ever seen has had the engine running the right...
Finnegan’s Garage: Finnegan Uses His 650 HP C10 As A Parts Truck, So The Caddy Can Get Turbos!
Finnegan and Newbern are at it again, working on the shop, fixing rust in the Ramp Truck, hauling parts in the C10, and trying to decide where the turbos are going in the Caddy. Since the engine...
$3,500 Build: Air Ride, Trunk Sheet Metal, And Lead Bodywork On The Front End Of This Low Budget Hot Rod
Here are the latest installments from the $3,500 Build, and it is really starting to come together. With the sheet metal work on the front end coming together, as well as in the trunk, along with the...
$3,500 Build: Finishing Up The Sheet Metal Work On The Front End, Plus Bumpers Finally Go On, And More!
Here’s the latest installments from the $3,500 Build, and it is really starting to come together. With the sheet metal work on the front end coming together, and word on whether to chop the top...
$3,500 Build: Turbo Stuff, Sheet Metal, Body Fitting, And More On This Low Buck Bud Cool 1951 Chevrolet
The Casey’s Customs 1951 Chevrolet build has been pretty cool, and feels a lot like his $1,000 budget F100 build he finished a few months ago. Because the budget is higher, this project is has...
What Could Finnegan Possibly Want With A One Owner Big Block 4-Speed Corvette That Has Been Sitting For 40 Years?
Friends of Finnegans, or those that watch and pay attention to the channel enough, know that Mike would really like a C2 Corvette to build into a fun and fast street strip car. So when he heard about...
Rebeldryver’s Garage: 400 Cubic Inches, A T-56 Magnum, And More To Get This Hot Rod Running Again
I know the curse of having cars sitting and not running for years all too well. A couple years ago we spent 12 days thrashing on my 1969 Camaro in order to get it back together after 15 years of...
Finnegan’s Garage: This Old Chevy Hasn’t Run Since 1974, But That’s All About To Change!
In this episode of Finnegan’s Garage, Newbern actually gets his 1957 Chevy running for the first time since 1974! This thing is epic, was a totally accidental roadside find, and Newbern is...
$3,500 Build: Bags, Body Fitment, And Turbos. Wait…Turbos? Oh Yeah
Casey is making big things happen on the $3,500 build and that means getting the suspension finished up, mounting the body where it needs to go, and adding turbos. Wait, turbos? Yeah, apparently...
$3,500 Build: Moving The Axle, Installing The Air Bags, And Test Fitting The Body On The $3,500 Budget ’51 Chevy Build
The last few videos have stacked up on this project and you are going to see all kinds of stuff getting torn apart, before some new stuff finally gets put back together. Bagging a custom that is...
