Category Archive: 1320 Project Cars, 1320 Spotlight, 1320 Suspension Tech, 1320 Tech Story, BangShift 1320, CHEVY, Project Cars, SUSPENSION, TECH, Tech Stories, Videos
IS AN AFTERMARKET CHASSIS WORTH IT? FINNEGAN IS BODY SWAPPING HIS 1957 CHEVY GASSER.
Body swap, chassis swap, whichever you call it, it involves putting a car onto a new chassis either for repair, a performance improvement, or both. I did my first in 2005 when I swapped my 1956 Chevy...
Stacey David Shares The McLaren Story & Explains How You Can Build Your Own M6GT Replica! This Is Going To Be Something Cool!
The McLaren M6GT is one of the most famed and sexy cars to never actually get produced. Sure, there are a ton of concept cars and renderings that have never come to be an actual road car, but most of...
Bello’s Is Working On A 1950 Chevy Pickup Truck: Part 2 – A C-Notch And Transmission Crossmember So Pickup Can Sit Low And Ride Nice
It’s time for an update on this cool 1950 Chevy pickup project they have recently started over at Bello’s Kustoms. Mike and the crew have been working on this one and started out with...
Crashed LS Turbo Drag And Drive Car Gets Rebuilt: The Maliboom Gets A Sexy New Rearend AND Comes Home From The Chassis Shop!
Here’s another Maliboom project update and boy is this car coming right along. In the two videos below you are going to see a sexy new rearend housing come together, along with the last of the...
Bello’s Is Working On A 1950 Chevy Pickup Truck: Part 1 – Installing an Independent Front Suspension And Engine Mounts
The Bello’s crew are back at it again, with another customer project in need of the perfect stance, power, and reliability. While Mike and the crew build cars and trucks that have a more...
FINNEGAN IS GIVING AWAY HIS 1957 CHEVY WAGON, BUT FIRST HE’S GOTTA FIX IT! Gasser Time!
The cat is out of the bag by now with the fact that Finnegan is going to give away his 1957 Chevrolet station wagon gasser. You can enter by using the link below, but suffice it to say you will be...
Featured Product: New 4-Link Kit For GM F-Body And 1968-1974 X-Body From QA1 With Simple Installation And Tons Of Features!
QA1’s triangulated 4-link system is a performance-driven upgrade for F-body and X- body owners seeking to replace their outdated leaf springs and deliver modern, refined handling and comfort. By...
Crashed LS Turbo Drag And Drive Car Gets Rebuilt: The Maliboom Get’s A Front Suspension Redesign And Rear Upgrades Too!
If you missed it, Dane Thompson’s Maliboom smacked the wall in Oklahoma during Rocky Mountain Race Week a few months ago and he’s been thrashing on it since. Despite lots of conjecture, it turns...
The Custom Bed On The Two Front Jeep Project Is Almost Done – Part 3: Will The Rest Of The Jeep Be Done For Unreal Adventure?
Dave has gotten most of the Jeep rebuilt, converted, and maintained so that he can get it to the 2024 Unreal Adventure, and the bed is coming along nicely. But will it all be done in time for him to...
Metal Fab: Bello’s Kustoms Is C-Notching And Four-Linking An Aftermarket Chassis For A 1936 Ford Custom
If you’ve been around here for awhile, you know that we love Bello’s Kustoms on YouTube. Mike Bello is funnier than hell, very talented, and has an eye for building customs. He’s...
New Project Truck: Here’s The Metal Massacre Fab Shop’s Next Project Truck, The Blue Goose! Is Matt Getting In Over His Head On This One?
(Words by Charles Wickam) Matt over at Metal Massacre Fab Shop, in Southern Indiana, may have bonked his head jumping into the deep end with this one. He and his wife decided to rescue a long...
Metal Fabrication How-To: Build Your Own Lower Control Arms From Scratch At Home!
You can do it! I know that building your own control arms might be an even more daunting task than the average chassiswork, and that already intimidates a lot of folks, but if you do think right you...
Did Finnegan’s OBS Truck Get Finished In Time For SEMA? Will It Run? Will It Drive?
Finnegan’s OBS GMC will undoubtedly be a fun and cool ride, but will it run and drive and be ready to go at the SEMA Show? Or will it be a roller that just looks cool? There are plenty of those...
