Category Archive: CHEVY, Metal Fabrication, Project Cars, TECH, Tech Stories, TRUCKS, Videos, XL Project Trucks, XL Tech Stories, XL Videos
Make It Kustom, HalfAss Kustoms Cab Over Ramp Truck Build! The 1971 GMC Fire Truck Ramp Truck Gets The Rear Of The Cab Sorted And Engine In!
Here is the second video in the series about mounting the cab and making it tilt. It features Brent from Halfass Kustoms over at Karl’s place from Make It Kustom. Together they are going to thrash...
DO EXPENSIVE SPARK PLUGS REALLY ADD POWER? E3 VS LASER PLATINUM VS CHEAP COPPER
When it comes to spark plugs, there are all kinds of claims as to which ones make more power, get better mileage, and make your engine run cleaner. And while Richard can’t test if they make a...
ABANDONED For DECADES! Puddin’s Fab Shop 1961 Chevrolet Bel Air Wagon Rescue!
Puddin has been acquiring some particularly cool rides in the past few months, and this one is no different. This 1961 Bel Air Wagon has been sitting for a very long time and wasn’t ready to...
Motion Raceworks Tech Tip Tuesday: Unpack Your Parachutes!
Unpack your chutes? Wait, what? Yep, unpack them. If you have a car that is going 150 mph or more on the dragstrip you are required to have a parachute on the car. You are not required to use it, but...
DeWALT VS Milwaukee On The Cordless Drill Dyno Brake… Which One Will Survive The Lie Detector
We’ve shown plenty of tool testing videos between the Torque Test Channel and Project Farm, because there is a cordless tool battle going on that rivals the diesel wars between Ford, GM, and...
Iron Trap 1932 Ford “DeLorean” Roadster: This 1932 Ford Roadster Is Starting For The First Time Since 1953!!
This week’s video has Matt and the gang working toward the first start of the DeLorean roadster and we are getting excited about how far this car is coming along. It’s not run since 1953! How...
Halfass Kustoms 1955 Chevrolet NAPCO 4×4 Project: Installing Seats And A Front Bumper!
In this latest installment of the NAPCO Clone build, Brent is working on the cooling system, then making sure everything is buttoned up under the hood. At that point, this thing is a runner and Brent...
Making Six Out Of Four: Watch England’s Allen Millyard Create A Set Of Kawasaki Z1 Six Cylinder Jugs!
We have been showing you some cool videos recently shot by a guy named Allen Millyard in England. This dude creates wild, factory-looking custom motorcycles in his little garage and shed and he does...
Polishing Turds: Part 13, Finally Dyno Testing The Polishing Turds Traditional Small Block Build!
In this new episode of the Polishing Turds series from HED you are going to see the assembled engine getting tested! Can you guess how much power it is going to make on the dyno? Pete covered...
Who Makes The Best Car Jump Starter In 2022? Jump Start a 5.9L Diesel & 7.4L Big Block? NOCO, Autogen, Yesper, Gooloo
I remember when little jump packs started to become a thing a few years ago after previously having to carry around a jump pack that was the size of a car battery with jumper cables hanging from it....
Ever Wonder How They Bend 2x4x.188 Frame Rails?
Bending round tubing smoothly is a relatively simple process and there are a lot of machines and tools that will do those bends in your garage. But bending square or rectangular tubing is a...
The Alfarrari Project: The Ferrari Powered Alfa Gets Power Steering
The Tunnel is in, as are the engine and trans, but there is still a lot to do. I mean a lot. Before we get into all the work that is going into building a set of headers for this thing, we’re...
Pro Eagle Clone Or Killer? Harbor Freight Offroad Jack Test and Review.
I feel like off-road floor jacks are a much more western states thing because a lot of our off-road racing is desert based there. And if you go on any fun desert racing adventures you will see an...
