Can Dylan McCool REVIVE This 300,000 Mile Farm Truck? First Wash in Decades!
Dylan is back at it again, with another long forgotten and neglected old truck. This on has been named Lunchbox, and is in serious need of a good bath. But how much more than a bath will it take to...
Truck Jumping Instructional Video: Follow These Simple Steps To Be A Hero
Anything automotive that is jumping off the ground is cool. When it’s a low buck truck that is driven by someone with enthusiasm, a goal, and some technique then it’s even better. Anyone...
Halfass Kustoms 1955 Chevrolet NAPCO 4×4 Project: Finally Fixing The Front Fenders!
In this latest installment of the NAPCO Clone build, Brent is working on finally fixing the front fenders. They need some tricky areas repaired, so check out how he gets creative and breaks down...
Lawrence Tolman Regears The 8.8 In The COYOTE KILLER For Better Acceleration
Ford’s 8.8 inch rear axles have become a very popular performance choice in not only the cars and trucks that came with them, but also a lot of other rides receiving swaps. Sure, the Ford 9...
DIY MegaCab Bumpside Ford Project: The Roof Is Going On!
In Part 7 there is a lot going on as the roof goes on! Because of the way they are building this thing the cab is longer than a factory crew cab, hence the MegaCab name. Because of this, there is...
Breaking the Colorado on Ultimate Adventure: Ian’s Trip Not Going As Planned
We’ve shown you some of the work going into the Colorado that Ian Johnson was taking to Ultimate Adventure this year, and we are sad to see that the poor thing had some issues on the trail....
Great Video: RideTech Tells You How To Avoid The Top Five Problems That Come Into Play When Lowering A Vehicle
Changing the suspension of your car or truck may be physically “easy” and one with bolting on parts but the math and physics involved is tough stuff. The engineering side of things is...
Halfass Kustoms 1955 Chevrolet NAPCO 4×4 Project: Modifying A Stock Column Shifter, Shortening The Driveshaft, And More!
In this latest installment of the NAPCO Clone build, Brent is working on a cool shifter setup where he’s using a factory manual column shifter and some ingenuity to make it shift the late model...
BangShift PSA: Don’t Catch A Bumper To The Face When Off-Roading – Be Smarter Than This
We know that loads of you have free-time on your hands these days and that time can be filled doing lots of different stuff. Those of you with off-road vehicles have likely or will soon likely find...
Newbern Got A Robot! Check Out His New Arcdroid CNC And Plasma Cutter
If you are like me, then you have looked at just about every conceivable “CNC Plasma Cutter” option there is out there. And man there are a lot of them. I’d love to have one of...
If You’ve Ever Thought About Building A Camper Van, Watch This! Complete Van Build Timelapse | Step by Step Amateur Build
Camper vans have been all the rage over the past few years and people have been buying and building them in all kinds of locations all over the world. There are several builders all around the world...
Making Patch Panels For A 1965 Ford E100 Van Pickup From Scratch
We share a fair amount of rust repair videos around here because most of the cars and trucks we’re into are older and that means many of you out there are going to have examples that have at...
Iron Giant Video: The Story Of Massive Presses And How They Have Literally Shaped The World
While we like to laugh along with the Hydraulic Press Channel, there’s a far more serious side to the real of the hydraulic press. We found an intensely interesting video that tells the story...
In The Market For A New Rearend For Your Ride? Before You Purchase A Rear End Housing…… WATCH THIS!
No matter where you purchase your rear-end housings from, there are some basic questions, measurements, etc that are required before you make an order. With that said, there are also some decisions...
