Category Archive: 1320 Tech Story, Apex Tech Stories, Metal Fabrication, TECH, Tech Stories, Tools, Videos, XL Tech Stories
TIG Welding 301: TIG Welding Thick Aluminum Parts To Thin Aluminum. Here’s An Important Lesson, Plus Tips And Tricks.
When it comes to materials for building race car and hot rod parts, we tend to go to the extremes. Some parts and pieces are as thin as possible to save weight, and other parts are super thick so...
Simple DIY Tooling for HAMMER FORMING BEADS: Use Them With A Power Hammer, A Press, Or By Hand!
If you haven’t seen any of our other videos of hammer forming parts, then you are going to want to use the link below to check them out as well. But in this latest video from our friends at...
Murder Nova Burnout Truck – Build Series Part 2: It’s Going Back Together After Paint, And Then It’s Time For The Power!
It sure wasn’t pretty, but they got that part in the works and now it’s time to get some suspension under it! It’s time to build a burnout truck and that’s just what they are going to...
Kingpin – The 1956 F600 Crew Cab Project: Cab Fab, Chassis Work, Bed, Tubs, Fenders And More. Metal Fab Greatness!
When I walked up to Kingpin at the PRI Show in Indy last December I thought it looked cool, but I had no idea how cool. This truck is truly something special. I spent 20 minutes walking around it...
Are You A Beginner Just Learning How To Weld? Setting Wire Speed On A Mig Welder To Match Voltage Is A Must For Clean Welds Quick!
I’ve been welding for over 90% of my life. My Grandpa Lanning taught me as a kid and I’ve been welding ever since. When I learned there were no diagrams or charts or anything like that,...
Street Freak – Part 1: This New Street Race Project Out Of Sweden Is Nuts! Twin Turbo Lambo Powered, Mid Engine, 25.2 Drag And Drive Greatness!
Okay folks, this one is going to be something special. And it takes someone special to want to build something like this but we love Peter Bjorck for it! We’re not going to tell you what body...
Look At What The Barn Find Hunter Has Discovered! JACKPOT: 90,000 sqft of Barn Find Heaven – Muscle Cars, Trucks, & More!
Barn finds are awesome, and this one here is truly something special. I’m not saying that you are going to want every single car and truck that is in these barns, but if you don’t find...
A Battery Powered Welder? Does It Really Work? Ian Johnson Does A Full Test of the ESAB Volt Battery Powered Welder
Welders have gotten more and more efficient in the past decade or so, and today you can weld bigger materials for much longer on less voltage. This is because of inverter technology and other trick...
Can You Really Make Your Own Parts? Have You Wondered About Send Cut Send After Seeing All The Ads? Check Out This Candid Review
If you are into car stuff at all, which should be everyone reading this, then you undoubtedly have seen SendCutSend ads on Facebook, Instagram, YouTube, etc. There are lots of ads talking about their...
Cold War Era Power Tools vs 1990’s vs Today: Putting Electric Impacts To The Test! Do Battery Operated Tools Compete With Plug Ins And Air??
While it is fun to see how the latest tools stack up against each other, something the Torque Test Channel does better than just about anyone, we’ve all used an old tool and said how much...
Chevrolet S10 Electric Parked 25 Years! Can We Make It Drive Again? And What Engine Should Go In It Next?
This one was a weird one for Jared, but he digs it because the story is pretty impressive. And if you missed the story of getting this little truck, and its history, we encourage you to use the link...
Perhaps Their Craziest Experience Yet. 1320Video Goes Street Drifting On Japanese Mountain Roads! Street Racing At A Whole New Level.
If you are a casual drifting fan, or not a fan at all, you might not know that this motorsport started on the streets. We’re not talking about sideshows and hooning, we’re talking about...
One Owner, Original, Unmolested 1972 Plymouth Barracuda! Blue with White Interior, Rallye Dash
Talk about a survivor! This Mopar is an awesome score and Chad is going to tell you all about it in the video below. But read the story below as well and if this needs to be yours you can contact...
This Amazon LASER Welder, Cleaner, and Cutter Will Cost Around $9,000! Brent At Halfass Kustoms Got One. Is it worth it?
We’ve all seen the ads on Facebook and stuff where they are showing a small handheld laser removing rust right off a sheet of steel like it is nothing, and if you are anything like me you have...