More PDRA 2024 East Coast Nationals Action Photos: Dragsters, Door Cars, And All The Tire Smoking Wheelstanding Action Shots You Want To See!
(Photos by David Whealon) The PDRA East Coast Nationals at GALOT Motorsports Park were some badass drag races and for good reason. This is one of the coolest dragstrips in the country, and when the...
Rubber Duck: Finnegan Spent $88 Bucks on Carb Jets and Added Nearly 100HP to His Barnfind Pontiac Firebird!
I’m sure he’s wishing he’d been there before the recent dragstrip testing, but after not getting the Rubber Duck to run the way he wanted in his previous video, he hit the chassis...
Billy the Kid DOMINATES in BOTH Both Of His Cars After Driving All The Way To Florida! @StreetRacingChannel Greatness
Billy the Kid, and his Street Racing Channel on YouTube, are known for putting on a show and hauling ass with whatever they touch. His Nova and S10 are both very well known, but he predominantly...
KALITTA, TASCA AND J. COUGHLIN TAKE PROVISIONAL NO. 1 SPOTS AT NHRA 4-WIDE NATIONALS
LAS VEGAS (April 12, 2024) – Reigning world champion Doug Kalitta made the quickest Top Fuel run on Friday at The Strip at Las Vegas Motor Speedway, powering to the provisional No. 1 spot at the...
PORTED M90 BLOWER TEST-HOW MUCH POWER IS PORTING REALLY WORTH? CAN THE JUNKYARD M90 MAKE 650 HP?
Does porting a blower really make a big difference in power numbers? Guys have been having it done for years, but many of them just go by the word of the guy porting them. And there are plenty of...
PDRA 2024 East Coast Nationals Action Photos: Dragsters, Door Cars, And All The Tire Smoking Wheelstanding Action Shots!
(Photos by David Whealon) The PDRA East Coast Nationals at GALOT Motorsports Park were some badass drag races and for good reason. This is one of the coolest dragstrips in the country, and when the...
BEST JUNKYARD DAY EVER! WHO FINDS FOUR 6.0L LS MOTORS IN 1 DAY? FORD & DODGE V10S, CLASSICS & BOOST!
I’ve been at the wrecking yard with Richard Holdener on multiple occasions and can tell you that SoCal has some great spots to pickup engines and parts. With a jillion cars in the area, the...
Having A Bad Day? This Compilation Of 1980s Drag Racing Wreckage And Calamity Will Set You Right
Now here’s the cure for the common bad day. Every moment of this video below is filled with someone who was having a worse day than you about 30 years ago. From Mike Dunn wrecking the Hawaiian...
Liggett Starts His First LS Engine Build! Did He Buy A Good Used Engine Or A Bad One? The Teardown Never Lies!
Scott Liggett, aka Rebeldryver, has been hot rodding small block and big block Chevrolets for a long time, and while he’s worked on some LS stuff while he was at Blueprint Engines and on other...
Featured Products: G-Body Mafia Rejoice! Upgrade your G-Body with Classic Instrument’s G-Body Gauge Cluster
If you are building a cool G-Body, which we FULLY support, then you need to check out these new gauges from the folks at Classic Instruments. They are as modern as they come, but look right at home...
Happy 4/10! No We’re Not Talking Sprint Car Engines, Rather A Pair Of Forgotten Oldies From The MEL and FE Families
We’re here with a pair of blue oval products that were both short-lived and while of the same displacement they were not related at all. Interestingly Ford produced a 410ci of the MEL engine...
Making 500HP with an $800 Dollar Junkyard Truck Engine And Then Throwing It, And A Tremec 5-Speed, In The 1964 Nova To Thrash!
Making 500 horsepower with a junkyard LS takes very little work, and gives huge return on investment when it comes to smiles. When you add an American Powertrain TKX 5-speed swap to the mix,...
Alex Taylor Takes Us On A Tour Of The QA1 Headquarters And Factory In Minnesota. 100,000 Square Feet Of Suspension Goodness.
QA1 has been a player in the high performance muscle car and classic truck suspension market for years, but in the last five years they have made huge strides to increase their offerings not only...
Are Flare Nut, Line Wrenches Any Better Than A Regular End Wrench When Loosening Or Tightening Tube Ends? Let’s Settle This!
The right tools can make a huge difference in how well, or how easily, you complete a project. But there are also plenty of tools that are available that are far from necessary. I’m a low buck...
