Category Archive: Apex Driveline Tech, Apex Engine Tech, Apex Project Cars, Apex Spotlight, Apex Suspension Tech, Apex Tech Stories, Apex Video, CHEVY, DRIVETRAIN, ENGINE, ENGINES, Metal Fabrication, SUSPENSION, TECH, Tech Stories, Videos
LS Corvair Project: Almost Ready To Fire! Plumbing The Expansion Tank And Getting A Full Underneath Tour
This project is getting closer and closer to a real running and driving car. The expansion tank is the subject of this video here, but John gives you a complete tour of the bottom of the car as well....
Pro Touring Triumph GT6 Build: Building A Full Custom Chassis And Rear Suspension
In the latest episodes of this build the all new chassis gets going and so does the modified Corvette rear suspension. Watch, be inspired, and then it will be time for the front and the engine! So...
Great Video: RideTech Tells You How To Avoid The Top Five Problems That Come Into Play When Lowering A Vehicle
Changing the suspension of your car or truck may be physically “easy” and one with bolting on parts but the math and physics involved is tough stuff. The engineering side of things is...
Single Seat Race Car Build Part 12: Rear Radius Rods And Framing Out The Cockpit!
In this latest installment of the build, the rear radius rods get sorted and the cockpit gets laid out. This isn’t a big car so all this stuff is important to get right the first time....
Project Allegro Part 4: Strut Towers And Inner “Wings” Mean This Thing Is Becoming A Car Again!
Here’s Part 3 of this cool new project build. The front suspension is going together and geometry is at the forefront. This one is going to be pretty impressive when done. We love project vehicles...
Classic Mini Cooper Race Car Build: Front Subframe Reinforcements And Other Custom Race Car Mods
This little Mini, no pun intended, is getting closer and closer to being a race car. The factory subframe and mounts are not strong enough or stiff enough to do the job under racing conditions, so in...
Project Allegro Part 3: This Sleeper K20 Powered Allegro Is Going To Be Something Else
Here’s Part 3 of this cool new project build. The front suspension is going together and geometry is at the forefront. This one is going to be pretty impressive when done. We love project vehicles...
Classic Mini Cooper Race Car Build: Building A New Rear Subframe Mount Plus A Bonus Video!
Now that the cage and everything inside the Mini is where it is supposed to be, it is time to make sure the rear subframe will also be up to the task of holding on around corners. The factory...
Single Seat Race Car Build Part 3: Lowering The Traditional Rear Suspension With A Reverse Eye Leaf Spring
Lowering a hot rod has never been easier than it is today, but back in the day these things required a lot more work and creativity because there weren’t aftermarket parts available. So when...
Casey’s Customs 1965 Mustang Chassis Swap: New Wheels, Slammed In The Weeds, And More!
In this video the air ride suspension is finished, the car is laid out low, and the new wheels came in. This thing is hammered a lot harder than Casey thought it would be. Casey is back at it again!...
Install Video: Check Out This How-To On Installing The Ridetech 1988-98 C1500 Coil Over Suspension! Awesome System
The 1988-98 Chevrolet truck platform has finally come into its own in the world of hot rodding and that means parts and pieces are being developed with a fury by the aftermarket. Ridetech recognizes...
LS Corvair Project: Cantilever Suspension, Engine Mods, And More Are Going In!
This project continues to impress and inspire and we love it! Check out all the cool stuff going down in this episode of the build, because this car just keeps getting more trick. John Reynolds is a...
Finnegan’s Garage: FINALLY FIXING THE WORLD’S DEADLIEST 2JZ-SWAPPED DODGE CHARGER!!!
Finnegan’s Death Metal Charger is arguably the scariest car that he and Newbern have in the fleet of fun. It is cool as hell, but it certainly isn’t easy to drive, comfortable, or...
