Result for: Halfass Kustoms
Halfass Kustoms 1955 Chevrolet NAPCO 4×4 Project: Installing Seats And A Front Bumper!
In this latest installment of the NAPCO Clone build, Brent is working on the cooling system, then making sure everything is buttoned up under the hood. At that point, this thing is a runner and Brent...
Make It Kustom, HalfAss Kustoms Cab Over Ramp Truck Build! 1971 GMC Fire Truck Ramp Truck Gets The Tilting Cab Mounted
Here is the second video in the series that is going to feature Brent from Halfass Kustoms over at Karl’s place from Make It Kustom. Together they are going to thrash and see how far they can get...
Make It Kustom, HalfAss Kustoms Cab Over Ramp Truck Build! 1971 GMC Fire Truck Ramp Truck Gets Yet Another Chassis
Here is the second video in the series that is going to feature Brent from Halfass Kustoms over at Karl’s place from Make It Kustom. Together they are going to thrash and see how far they can...
Halfass Kustoms 1955 Chevrolet NAPCO 4×4 Project: Finishing Up Under The Hood, Adding A Cooling System, And Then Burnouts!
In this latest installment of the NAPCO Clone build, Brent is working on the cooling system, then making sure everything is buttoned up under the hood. At that point, this thing is a runner and Brent...
Cab Over Ramp Truck Build! A 1971 GMC Fire Truck Becomes A Ramp Truck When Make It Kustom And Halfass Kustoms Get Together!
Dude! This 1971 GMC fire truck that Karl at Make It Kustom found, is in unbelievable condition and ready for a new home. His plan is to put that thing together on a new chassis and to make it into...
Halfass Kustoms 1955 Chevrolet NAPCO 4×4 Project: Finishing Front Fender Rust Repair On The 1955 Chevy Napco Clone
In this latest installment of the NAPCO Clone build, Brent is working on finishing up the front fenders. They needed some tricky areas repaired, so check out how he gets creative and breaks down...
Halfass Kustoms 1955 Chevrolet NAPCO 4×4 Project: Finally Fixing The Front Fenders!
In this latest installment of the NAPCO Clone build, Brent is working on finally fixing the front fenders. They need some tricky areas repaired, so check out how he gets creative and breaks down...
Halfass Kustoms 1955 Chevrolet NAPCO 4×4 Project: Modifying A Stock Column Shifter, Shortening The Driveshaft, And More!
In this latest installment of the NAPCO Clone build, Brent is working on a cool shifter setup where he’s using a factory manual column shifter and some ingenuity to make it shift the late model...
Halfass Kustoms 1955 Chevrolet NAPCO 4×4 Project: First Start! It’s ALIVE!!!
In this latest installment of the NAPCO Clone build, Brent is working on the fuel system and finally starting it up for the first time! If you have missed any of the previous installments on this...
Halfass Kustoms 1955 Chevrolet NAPCO 4×4 Project: Wiring, Fuse Block And ECU Mounting
In this latest installment of the NAPCO Clone build, Brent is working on wiring, but not just stringing them out. He’s also mounting the LS fuse block and ECU mount, planning out wiring, and...
Halfass Kustoms 1955 Chevrolet NAPCO 4×4 Project: Prepping For The LS Install. Firewall, Transfer Case Mount, And More.
In this latest installment of the NAPCO Clone build, Brent is working on the firewall, some paint and undercoating, and the transfer case mount among other things. We’re sharing two videos this...
Halfass Kustoms 1955 Chevrolet NAPCO 4×4 Project: Cutting Out Rusty Floors And Making Patch Panels For Everything
In this latest installment of the NAPCO Clone build, Brent is going to the rear of the cab to replace more rust. Now that the front is done, will this be the last rust repair? If you have missed any...
Halfass Kustoms 1955 Chevrolet NAPCO 4×4 Project: How To Fix Rusty Cab Corners From Scratch! No Expensive Reproductions Needed.
In this latest installment of the NAPCO Clone build, Brent is going to the rear of the cab to replace more rust. Now that the front is done, will this be the last rust repair? If you have missed any...
