Category Archive: Hack of the Week, Metal Fabrication, TECH, Tech Stories, Videos
Surface Rust Sucks! Here Are Some Rust Removal Secrets From The ProShaper Workshop
Flash rust or surface rust, whatever you want to call it, rust sucks when you go to work with a piece of sheet metal only to find it has a coating of it on one or both sides. You certainly...
Install Video: Check Out This How-To On Installing The Ridetech 1988-98 C1500 Coil Over Suspension! Awesome System
The 1988-98 Chevrolet truck platform has finally come into its own in the world of hot rodding and that means parts and pieces are being developed with a fury by the aftermarket. Ridetech recognizes...
DYNO VIDEO: How Much Power Does BeerMoney Actually Make?!
People are always asking how quick and how fast Beer Money is, and then they ask how much power it makes. With all the No Time, No Prep racing that we’ve been doing with it, there isn’t...
Casey’s Customs 1965 Mustang Chassis Swap Continues! It Is Alive!!!
It’s Part 3 of the 1965 Mustang chassis swap. Or is it a late model Mustang body swap? Regardless, this is the project you will laugh at and think is cool as hell if you like old and new...
A Delicate Balance: Check Out This Trip To The Machine Shop And An In-Depth Look At How To Balance A Crank and Rotating Assembly
Long before the internet, few hot rodders had any REAL idea what happened in the back of the machine shops they sent their parts to. Drop it off, come back a week later to get it, pay the man, and...
Who Makes The Best Hex Bit Socket Set? DeWalt, Kobalt, Craftsman, Husky, Neiko, Pittsburgh, Tekton, GearWrench
We love tool reviews, and especially ones that are at thorough as the ones you’ll find from Project Farm. This one is a hex bit socket test and I can tell you from personal experience that I...
Half Ass Kustoms 1951 Ford Pickup Project: The Fuel System Goes In, Plus Some Bonus Model T Action
Here is Part 7 of the 1951 Ford Project. In this episode of the build, it’s time for the fuel system and a few other tidbits, along with some bonus footage of Brent working on replacing a...
Iron Trap Model A Shop Truck: How To Install a 1933/34 Ford Steering Box In A Model A Hot Rod!
The Iron Trap Model A shop truck project is turning out to be a pretty cool and fun one. With more and more of the truck going together, it is time to see what it’s going to take to make it...
Engine Building Zen: This ASMR Video Of A Hot Rodded Subaru Engine Being Built Is The Gearhead Equivalent Of A Nature Film
This could be the most relaxing and cool engine build video we have seen in a long, long time. Why? There is no music, there is no talking, there is only the sounds of the work being done....
Big Block Chevrolet Power Combos! 400 To 1000 Horsepower, All Right Here!
There are a ton of ways to make horsepower nowadays, and it has never been easier than it is in 2022, but with so many options and so much information it can be intimidating when trying to decide on...
Best Bit Holder? Milwaukee vs DeWalt, Makita, Hilti, Irwin, Ryobi, Bosch, Neiko, Wera, Wiha
Bit holders suck!!! Or at least they do if you really put them through their paces. I’ve tried a bunch of different brands and can tell you that the bits themselves and the holders for them,...
Half Ass Kustoms 1951 Ford Pickup Project: Mounting The Bed, The Tailgate And The Lights To Get This Thing Looking Like A Truck
Here is Part 6 of the 1951 Ford Project. In this episode of the build you’ll get to see Brent throwing the bed on, and then figuring out all the mounts, making the wheel tubs, then making...
Polishing Turds Episode 3: Line Honing This Small Block To Make It Something Greater
When Peter Harrell, owner of Harrell Engine and Dyno, decided that he was going to start up a YouTube Channel of his own, he decided to call it “Real Good At Doin’ Stuff!!!” It’s a channel...
HOW TO ADD 90 HP TO A 5.0L FORD! 302 HEAD TEST-E7TE v GT40P v AFR 165. ARE ALUM HEADS REALLY BETTER?
Remember when a Fox-body Mustang with a cam and some nitrous with Flowmasters was a player on the street? When a guy with a Vortec and some ET streets was hardcore? Well that was 30 years ago, and...