Category Archive: 1320 Tech Story, Apex Tech Stories, TECH, Tech Stories, Videos
Dzus Fasteners Rule, But How Do You Install Them Properly? Doug At Motion Raceworks Shows You How!
Dzus fasteners, or quarter turn fasteners as they are often called, are one of the coolest aerospace and race car fasteners around. You’ve got a real race car when you have something being held...
Which LS Intake Manifold Is Right For You? Here Is The Biggest Intake Test In LS History. Check Out All The Testing Results
Normal people can’t get a handful of intake manifolds and bolt them to their engine to test and see which one is best for their project. But if you could, you certainly would. And when Richard...
Here’s What It Really Takes To Put Together An Aftermarket Mustang Body
With all the reproduction parts available for your favorite muscle cars and trucks, you can fix just about anything. But what about folks that are going crazy with a build or have something that is...
Engine Tech Video: How To Properly Degree In Your Camshaft – Take Your Time And Follow This Process For Success
Perhaps you have been used to needing to get jobs done in a rush. Time has been of the essence in your wrenching life because you’re thrashing after work, between your kid’s games, or in...
Project Isolation Restoration: Our 1960s Single Cylinder Engine Gets Cleaned Up And We Learn More
When last we left you, Project Isolation Restoration had been torn down and we were pleased to find that there were no real Boogey men waiting for us inside the engine. As an early teaser for the...
Gen 3 HEMI Dyno Testing: Long VS Short Headers, Single Plane VS Stack Injection, And DIY Adjustable Stacks! Which One Makes The Most Power?
If you are going through the trouble of bolting an engine to an engine dyno, you really should be taking advantage of all the time you have to test as many things as possible. This is exactly what...
Project Isolation Restoration: The Teardown Continues and We Get Our Block Squeaky Clean
In part one of Project Isolation Restoration, we told you about the vintage engine that we scooped up to rebuild for fun during this downtime when there’ not much else to do. The mill, if you...
Project Isolation Restoration: Bringing A Cool Old Engine Back To Life For The Fun Of It – Part 1
Idle hands are the devil’s playthings, right? After spending more than couple weeks home from the world of motorsports, it was time to put my money where my mouth was. Hell, I’ve been...
Basically Brutal: Watch This Paxton Supercharged, Holley EFI Equipped, Stock Bottom End 302 Mustang Make Power On The Dyno
This right here is BangShifty as hell. It has been a long time since we saw someone doing some stuff stuff with a stock bottom end 302ci Ford in a Fox Mustang and when we stumbled upon this video we...
Engine Tech: How To Check Piston To Valve Clearance Two Different Ways – Using Clay or Using A Dial Indicator
It’s kind of funny. Lots of our lives are spent in a rush, right? Trying to make time for the stuff we want to do after finishing the stuff we have to do. If there is one thing we know...
How To Build A Basic Chassis Jig, And How To Use It. The Fabrication Series Is Building Something Cool!
I’ve dreamed of having a big fancy chassis table for many years. You know, the kind you see in full blown chassis shops? Yeah, I want one of those, with all the fixtures and all the clamps and...
What Makes A Blow Through Carburetor Different? Here’s What’s Inside And Why!
Electronic Fuel Injection, EFI, seems to be the rage with anyone adding boost nowadays, but the truth is there have been jillions of hot rods and race cars built with carburetors designed for boost....
Engine Tech Video: Watch This Little 302 Receive A Trick Flow 11R Top End Kit – Installing The Upper End Of The Valevtrain
One of the neatest things to happen for people who love making horsepower over the last ten years has been the emergence, explosion, and acceptance of the “top end kit”. It was a...
