Category Archive: Metal Fabrication, TECH, Tech Stories, Videos
Shop Made Tools: DIY Tools Are The Best And This Bearing Puller Setup Is Something You Can Do At Home
This particular bearing puller setup is being built for a very specific project, but the idea and the execution is something you can easily do at home if you don’t have a set or want to make...
English Wheel Metal Shaping: Rust Repair On A 1960 Cadillac Coupe De Ville. Big Quarter Panels Mean Big Patch Panels
Old Caddy’s are awesome. I grew up with them, love them, and think that they are super fun cars to drive and to look at. The only downside to a big Cadillac is that they are big. LOL If...
1937 Ford Hot Rod Truck Build: You Know It’s Going To Start Off Right When You Have To Unload It With A Forklift
When you get a new “project” that is almost complete and in really good shape and that only needs some work in order to be up and running, those are holy grail kinds of finds and make you...
A Mighty Wind: This 454ci LS Engine Build Is Force Fed By A Fresh 3.0L Whipple Blower
This is nasty. 93 octane pump gas, 931 lb-ft, and 1,035hp all happening at less than 7,000 RPM. It’s a 454ci LS engine with a 3.0L Whipple blower cinched down on the top of it and my goodness...
Mini Pinzgauer 6×6 Build: This Awesome Little Ride Is Coming Together!
This Mini Pinzgauer is one cool little, no pun intended, project and I’m really excited to see it going together and to see what it is capable of when it is all done. Check out the next videos...
Tool Tech: How To Restore And Refinish Damaged Body Hammers
If you treat them right then body hammers can last a lifetime, but even if you do treat them right they will still undoubtedly end up with some damage on the face of them from the occasional missed...
Chop Top How To: Walden Speed Shop Chops A 1932 Ford Step By Step
Here is the fifth installment of videos from Walden Speed Shop on how to chop the top on a bitchin 1932 Ford. If you missed the first installment, use the link below to watch them first. Chopping a...
1933 Ford Project: Iron Trap Garage Does Chassis Work On This Major 1933 Ford Project
When someone like Matt says that the latest project is going to be the wildest yet, you have to listen. I mean he’s not the guy who throws these kind of claims around unless he means them, and that...
1933 Ford Project: Iron Trap Garage Is Starting Their Wildest Project Yet! This 3-Window Coupe Is Going To Be Rad.
When someone like Matt says that the latest project is going to be the wildest yet, you have to listen. I mean he’s not the guy who throws these kind of claims around unless he means them, and...
1960 Cadillac Rust Repair Fix: Hammer Forming Trunk Drop Downs And Bead Rolling a Curved Flange On Make It Kustom’s Caddy Project
Karl from Make It Kustom just moved into a new shop and a new house where he and his wife Kristina are planning some big things for the Make It Kustom Channel and their hot rod company Japhands...
What Power Adder Does A Gen 3 HEMI Like Most? Nitrous, Blower, And Turbo All Tested.
Here’s another one from Richard Holdener testing all three of the common power adders that you’d see someone try out on a Gen 3 HEMI to see if one stands out above the rest. Of course, my...
$3,500 Build: Finishing Up The Sheet Metal Work On The Front End, Plus Bumpers Finally Go On, And More!
Here’s the latest installments from the $3,500 Build, and it is really starting to come together. With the sheet metal work on the front end coming together, and word on whether to chop the top...
Metal Shaping How To: Make A Tucking Fork To Shrink Metal, Plus Demo How To Use It With Simple Tools!!!
Metal shaping is all about shrinking, stretching, and forming which makes it sound oh so simple. Of course, mastering all the ways to do those three things takes some time, but the premise is a...
