Result for: 428
Rebeldryver’s Ford 428 FE Project Part 8: His Newly Rebuilt Ford 428 Is Going In The Mud Bomber Galaxie, Plus First Drive!
In Part 8 of the build, Scott takes his freshly built and broken in 428 FE and slides it into the Mud Bomber Galaxie. This car has been sitting for far too long, as Scott has had some unfortunate...
Rebeldryver’s Ford 428 FE Project Part 7: First Fire Of His Newly Rebuilt Ford 428. Will It Run Or Be Another Failure?
In Part 7 of the build, Scott bolts this sucker to the engine run stand to see if it will actually fire up and not eat itself like the last time it was rebuilt. Let’s see how it all works out,...
Rebeldryver’s Ford 428 FE Project Part 6: Final Assembly Is On! Let’s Get This Thing Buttoned Up!
In Part 6 of the build, we’re going to final assembly coming to a close! Last time the cam and heads and such went together, and now it is looking like a real engine!. This engine is getting closer...
Watch This Awesome 428ci Pontiac Rev To 9,500 RPM And Make 1,000 Naturally Aspirated HP!
We use the term Pontiac here with a bit of a wink because the engine you are about to see make some big power on the dyno does not have a single stock Pontiac part in it. What it does have it is a...
Rebeldryver’s Ford 428 FE Project Part 5: Installing The Heads And Cam!
In Part 5 of the build, we’re going to be seeing the camshaft installed and also the cylinder heads. This engine is getting closer and closer to being ready to install and fire! After getting...
This 630hp Pontiac 428 Is A Rip Roaring Example Of Tin Indian Horsepower!
In the 1960s car companies had “big car engines”. Chrysler was jamming 413s in stuff, Chevy had their mid-horspower 396 engines moving most of their stuff along, and Pontiac had the 428....
Rebeldryver’s Ford 428 FE Project Part 4: Pistons And Rods Are Going In!
It’s back for Part 4! The pistons and rods are ready to be installed, and in this part of the build series that is exactly what is going to happen! Watch this 428 Ford engine build as it gets a lot...
Rebeldryver’s Ford 428 FE Project Part 3: Installing Icon Forged Pistons On Connecting Rods & File Fitting The Rings.
It’s back for Part 3, after getting the crank installed in preparation for hanging rods and pistons on it in Part 2. In this one, the rods and pistons get prepped, including mounting the pistons to...
Rebeldryver’s Ford 428 FE Project Part 2: Let The Bottom End Assembly Begin!
It’s back for Part 2, where the 428 FE is going to get ready for its crankshaft, but first, some measuring has to happen. No matter how good the machine shop is, it is always a good idea to do...
Rebeldryver’s Ford 428 FE Project Part 1: Prepping The Block For Assembly With Freezeplugs And Paint
Rebeldryver Scott is back with Project Mud Bomber, who’s 428 has been getting machined and prepped for a full rebuild. Because parts were scarce and the machine shop a bit slow, this one has...
Celebrating The “Other” 428 On 4/28 – A Video Bonanza Of Pontiac 428 Power Shredding Tires And Spinning Dynos
Since today is 4/28 you probably saw this coming, well maybe not THIS coming, but at least some kind of tribute to the 428ci engine, right? Because everyone and their brother will be talking Ford...
The Ford 428 Needs To Be Recognized On 4/28 – It’s The Right Thing To Do
The mighty Ford 428! This has been one of the most hot rodded engines in the Ford world since it hit the streets in a few different forms in the late 1960s. While only one ci larger than the 427 FE...
Project Mud Bomber Update: Rebeldryver’s Abandoned Barn Yard Find ’64 Galaxie 500 Has A New 428 FE Coming!
This poor barn find Galaxie has had an interesting life. After being abandoned for 35 years in a barn it was dubbed the mud bomber because the entire car was full of mud dobbers and dirt. And while...
Money No Object: 1969 Ford Torino Cobra 428 SCJ
If it wasn’t bright red and it wasn’t wearing a couple of little badges and the giveaway hoodscoop, this would be a basic-model Ford Torino, complete with body-colored wheels and...