Dirt Track Racer Charged With Assault After Ramming Other Car In The Pits: On Track Contact Leads To Race Rage Incident and Ban From Racing.

Every racer and fan knows that in the heat of competition emotions and adrenaline run high. We’ve all seen it, when a couple of drivers bump and bang and then it continues off track. But...

Read more

Why Is Torx So Bad And So Good At The Same Time? Testing Torx Bits And Explaining How They REALLY Work.

Anyone that works on cars and trucks is familiar with Torx fasteners and bits, as are anyone who’s done any DIY, deck, fence, or construction projects in recent years. There are some big...

Read more

FIA World Endurance Championships Highlights From TotalEnergies 6 Hours of SPA – Wheel To Wheel Racing Action

Round 2 of the FIA World Endurance Championships was held at SPA, aka Circuit of Spa-Francorchamps in Belgium, and did not disappoint. This is an epic race track, and the action here is always great,...

Read more

Capturing Car Culture With Larry Chen: First Cameras Allowed in Toyota’s GR Factory: Minimal robots & More Humans

This is a cool episode of Capturing Car Culture if you are like us and love to see factory and how its made videos. I’ve been on several automotive assembly plant tours and can tell you that...

Read more

Randy Pobst’s Randit Suspension Overhaul: Episode 1 of 5 – His Bandit Trans Am Needs Some Love!

Randy Pobst can wheel a race car, and on too many occasions to count we’ve seen him do it. But he also enjoys a quick and fast street car which means that upgrades are often in order. In the...

Read more

LIVE Road Racing: Sebring International Raceway GT America powered by AWS 2026

We’ve got more racing action from Sebring to share folks, so buckle up if you want to watch GT America presented by AWS. We’ll have both Saturday and Sunday’s races, so check them...

Read more

 

BIG BORE VS BIG STROKE-372 VS 383-WHICH SBC STROKER DOES IT BEST? BONUS TEST-302 VS 347 FORD

Is big bore more important than a big stroke? Or are cubic inches cubic inches? In this video we’re going to see Richard Holdener test a big bore 372 vs a big stroke 383 to see if one is a...

OPTIMA’s Ultimate Street Car Invitational- Part 2: 2023 Edition: Photos and Results!

(Words by Jim McIlvaine, Photos by Kaleb Kelley & Royce Rumsey) Bob Sobey’s Nissan GT-R became the third vehicle to successfully mount a title defense in the 16-year history of the OPTIMA...

CHEAP, JUNKYARD ALUMINUM 5.3L LH6-WHAT WENT WRONG? COMPLETE TEARDOWN AND INSPECTION…PLANS TO FIX!

So what happens if you go to the wrecking yard and find that dream aluminum 5.3 L33 or LH6 engine and then you put it into your ride only to find it has low oil pressure? I mean all these junkyard...

Ford Fest 2023 Car Feature, Errr Plane Feature: The Sky’s the Limit for Speedycop’s Plane Car Shenanigans. A Racecar Build From A Plane… Is Weird But Cool.

You see a lot of fun, creative, and sometimes weird vehicles at Holley’s Fest events. Whether it is LS Fest, Moparty, or Ford Fest there are always odd swaps and such that are specifically...

CAN YOU RUN REC-PORT LS3-STYLE HEADS ON A SMALL BORE 4.8L/5.3L? WILL REC-PORT HEADS EVEN FIT A 4.8L?

Which cam and which heads are probably the two most asked questions about an LS build, and the amount of info on the web can sometimes be daunting. Lucky for us, we have Richard Holdener who tests...

Polishing Turds Season 2: Part 5 – Boring And Honing Cody’s ProCharged 360 Cubic Inch Small Block To Make Big Power!

In the fifth episode of this new Polishing Turds engine project, Pete is going to be boring and honing the cylinders so this little supercharged small-block will make more power. This is just one...

HOW TO BUILD LS POWER ON THE CHEAP: THE ULTIMATE 510-HP, ALL MOTOR JUNKYARD 5.3L BUILD. STEP BY STEP BUILD & FULL DYNO RESULTS

Junkyard 5.3s make real power regardless of how many miles are on them. I mean a 200,000 mile 5.3 will make 350 horsepower on the engine dyno. But what happens with simple bolt ons? And how about...

Newbern And Cotten Found ALL The Superchargers And Speed Parts In Mississippi, Just Look

Newbern and the crew are back at it, traveling through the south for several events in the last month or two. This time they were delivering a car to one guy and a chassis to another. Along the way...

Holley Announces Fall Harvest Sale: Get Up To 20% OFF MSRP On SNIPER 2, Holley EFI, Flowmaster, And More Top Brands During Our Fall Harvest Sale!

Coming off of last week’s SEMA Show in Las Vegas, the number one question I got after talking about Holley’s new Sniper 2 fuel injection was if I was going to be able to get everyone a...

HOW MUCH HP CAN YOU MAKE WITH 317 LS HEADS? HERE IS A HINT-THE POWER LIMIT IS NOT FROM FLOW!

Everyone is always asking which LS heads are best and on the hunt for 243s all the time. But Richard Holdener, and several others, have done all the testing to see if there is much difference and if...

Weird Wankel – The Hercules W2000 Was The World’s First Wankel Powered Motorcycle See and Hear It Run In These Videos

We know that a bunch of you out there love motorcycles and while we’re interested by freaky stuff like the story of the Hercules W2000 rotary powered bikes, we don’t live and breathe the...

The Alfarrari Project: Brakes, Lines, Fuel System, And More! There Is A Lot In This Update!

There is so much going on with the Alfarrari project, and this update has all kinds of stuff going on. Brakes, Fuel System, Engine stuff, and more! There is so much going into building this little...

Holley Receives Prestigious “Best New Product” Award at SEMA 2023: Holley’s Easy Level™ Fuel Level Sender takes top prize in Engineered New Product category.

BOWLING GREEN, Ky. – November 6, 2023 – Holley Inc. (NYSE: HLLY), a leader in automotive aftermarket solutions, claimed one of the highest honors at SEMA 2023, the world’s premier...

Centurial Shares Their Best Tools, Tips, Tricks, And Secrets As They Build A Simple Roll Cage In Just One Day!

If you are a regular watcher of Mike Finnegan’s YouTube channel then you are probably familiar with the name Centurial. It’s a tool company that makes tools that help you fabricate roll...